Hansol Multitech Uromat 3000 Preinstalling the Tube Unit Collimator Combination

2.8 Preinstalling the Tube Unit – Collimator Combination

Assemble the tube unit – Collimator combination according to the description in the manufacturer's installation instructions. See Fig. 15

Fig. 15 Fig. 16

2.9 Installing the Tube Unit – Collimator on the Tube Unit Support Arm

Tilt the tabletop until it is vertical and move the tube unit carriage towards the foot-end. Remove the cover (Fig. 18/Pos. 6) on the tube unit support arm. Remove the support studs (Fig. 16/Pos. 1) from the tube unit support arm (Pos. 2). Place the preinstalled tube unit – collimator combination (Fig. 17/Pos. 1) down on its side and move the command arm (Pos.

2)between the support studs (Pos. 3) and the tube unit housing (Pos. 1) and secure them in place with the 4 screws (Pos. 5).

Fig. 17	Fig. 18
0116 7201	-40 of 90 -	06/00

Rev. 00 © 2000 Hans Pausch Röntgengerätebau Graf -Zeppelin-Str. 1 D-91056 Erlangen ALL RIGHTS RESERVED Ru