Carrier 40RMS, 40RMQ Ð Standard Drive Data, 60 Hz Ð SI, Ð Medium-Static Drive Data, 60 Hz Ð SI

Table 9G Ð Standard Drive Data, 60 Hz Ð SI

		40RM		40RM	40RM			40RM		40RM	40RM	40RM
	40RM	40RMQ	40RMS	40RMQ			40RMQ
UNIT					40RMS					40RMS	40RMS	40RMS
	007	40RMS	010	40RMS			40RMS
					014					024	028	034
		008		012				016
MOTOR DRIVE
Motor Pulley Pitch Diameter	61.0-	71.1-	71.1-	86.4-	71.1-			71.1-		94.0-	109.2-	109.2-
(mm)	86.4	96.5	96.5	111.8	96.5			96.5		119.4	134.6	134.6
Pulley Factory Setting	2.5	2.5	2.5	2.5	2.5			2.5		3.0	3.0	3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm)	224	224	224	224	229			229		239	279	279
Pulley Bore (mm)	25.4	25.4	25.4	25.4	36.5			36.5		36.5	49.2	49.2
Belt No. Ð Section	1ÐA	1ÐA	1ÐA	1ÐA	1ÐA	1ÐA		2ÐB		2ÐB*	2ÐB*
Belt Pitch (mm)	1024	1049	1049	1074	1074			1074		1062	(2) 1087	(2) 1087
											(2) 1113	(2) 1113
FAN SPEEDS (r/s)
Factory Setting	9.5	10.8	10.8	12.7	10.5			10.5		12.9	12.5	12.5
Range	7.8-11.1	9.2-12.4	9.2-12.4	11.1-14.4	9.0-12.1		9.0-12.1		11.3-14.4		11.4-14.0	11.2-13.9
Max Allowable Speed (r/s)	20.0	20.0	20.0	20.0	20.0			20.0		20.0	18.3	18.3
Change per 1¤2 Turn of
Moveable Motor Pulley	0.327	0.327	0.327	0.328	0.318			0.318		0.255	0.218	0.218
Flange
MAX FULL TURNS FROM	5	5	5	5	5			5		6	6	6
CLOSED POSITION
SHAFTS CENTER DISTANCE	265-313	265-313	265-313	265-313	265-313		265-313			232-279	169-240	169-240
(mm)

*Four belts shipped with unit. Use correct set of 2 belts sized according to the pulley setting.

Table 9H Ð Medium-Static Drive Data, 60 Hz Ð SI

		40RM		40RM	40RM			40RM	40RM	40RM		40RM
	40RM	40RMQ	40RMS	40RMQ			40RMQ
UNIT					40RMS				40RMS	40RMS		40RMS
	007	40RMS	010	40RMS			40RMS
					014				024	028		034
		008		012				016
MOTOR DRIVE
Motor Pulley Pitch Diameter	86.4-	86.4-	86.4-	86.4-	86.4-			94.0-	109.2-	109.2-		109.2-
(mm)	111.8	111.8	111.8	111.8	111.8			119.4	134.6	134.6		134.6
Pulley Factory Setting	2.5	2.5	2.5	2.5	2.5			3.0	3.0	3.0		3.0
Full Turns Open
FAN DRIVE
Pulley Pitch Dia (mm)	224	203	203	203	208			218	239	239		239
Pulley Bore (mm)	25.4	25.4	25.4	25.4	36.5			36.5	36.5	49.2		49.2
Belt No. Ð Section	1ÐA	1ÐA	1ÐA	1ÐA	1ÐA	1ÐB		2ÐB	2ÐB*		2ÐB*
Belt Pitch (mm)	1074	1024	1024	1024	1049			1062	1062	(2)	986	(2)	986
										(2) 1011		(2) 1011
FAN SPEEDS (r/s)
Factory Setting	12.7	14.0	14.0	14.0	13.7			14.0	14.7	14.7		14.7
Range	11.1-	12.2-	12.2-	12.2-	11.9-			12.4-	13.3-	13.3-		13.3-
	14.4	15.8	15.8	15.8	15.4			15.7	16.4	16.4		16.4
Max Allowable Speed (r/s)	20.0	20.0	20.0	20.0	20.0			20.0	20.0	18.3		18.3
Change per 1¤2 Turn of
Moveable Motor Pulley	0.328	0.360	0.360	0.360	0.352			0.278	0.255	0.255		0.255
Flange
MAX FULL TURNS FROM	5	5	5	5	5			6	6		6		6
CLOSED POSITION
SHAFTS CENTER DISTANCE	265-313	265-313	265-313	265-313	265-313		265-313		232-279	169-240		169-240
(mm)

*Four belts shipped with unit. Use correct set of 2 belts sized according to the pulley setting.

31