Carrier Complete Guide to Air Cleaner Performance Specifications

Legend and Notes for Tables 10C and 10D

LEGEND

ESP Ð External Static Pressure

NOTES:

1.Maximum allowable fan speed is 18.3 r/s for unit sizes 028 and 034; 20 r/s for all other sizes.

2.Fan performance is based on deductions for wet coil, clean 51-mm ®lters, and unit casing. See right for factory-supplied ®lter pres- sure drop.

3.Refer to fan motor and drive tables for additional data.

Factory-Supplied Filter Pressure Drop Ð SI

UNIT	AIRFLOW	PRESSURE DROP
	(L/s)	(Pa)
40RM	850	13
	1150	20
007
	1450	28
40RM	1000	17
40RMQ
	1400	27
40RMS
	1800	38
008
40RMS	1200	21
	1600	32
010
	2000	45
40RM	1450	28
40RMQ
	1900	42
40RMS
	2350	56
012
40RM	1750	15
40RMS	2350	24
014	2950	33
40RM	2100	20
40RMQ
	2800	30
40RMS
	3500	42
016
40RM	2900	32
40RMS	3800	47
024	4700	64
40RM	3500	36
40RMS	4700	55
028	5900	76
40RM	4250	47
40RMS	5650	71
034	7050	98

Replacing Filters Ð Filters can be removed and in- stalled from either side of the unit. Install new ®lters in units that have one fan as follows:

1.Remove the side access panel (retain screws).

2.Remove the ®lter retainer clip.

3.Remove old ®lters by tilting them and lifting them out of the ®lter track. See Fig. 12 and 22.

4.Reverse the procedure to install new ®lters.

To install new ®lters in larger units that have 2 fans, fol- low the preceding steps, but use the factory-supplied ®lter hook to slide ®lters within reach for removal. The ®lter hook is shipped inside the unit in the baserail.

Do not operate unit without air ®lters.

Fig. 22 Ð Filter Removal/Replacement

39