Black & Decker FS200SD instruction manual Maintenance, Accessories, Service, Warranty

Page 26

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

Apply household floor paste wax to the machine table and extension table or other work surface weekly.

PROTECTING CAST IRON FROM RUST

To clean and protect cast iron tables from rust, you will need the following materials: 1 pushblock from a jointer, 1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1 can of WD-40®, 1 can of degreaser, 1 can of TopCote® Aerosol. Apply the WD-40 and polish the table surface with the Scotch-Brite pad using the pushblock as a holddown. Degrease the table, then apply the TopCote® accordingly.

ACCESSORIES

Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you

need assistance regarding accessories, please call:1-800-54-HOW-TO (544-6986). The use of any accessory not recommended for use with this tool could be hazardous.

SERVICE

All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call:

1-800-544-6986 or visit www.blackanddecker.com

WARRANTY

Full Two-Year Home Use Warranty

Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.

The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.

The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under"Tools-Electric" in the yellow pages of the phone directory.

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use.

Free warning label replacement: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Special Warranty Note to Contractors:

FIRESTORMTM branded products are offered as high end consumer home use tools and carry a HOME USE WARRANTY. These tools are designed, manufactured and tested to meet or exceed the needs of the do-it-yourselfer in the execution of projects and repairs in and around the home. With proper use they will provide the home owner with step up power and performance well beyond their two year warranty. However, if you use tools for a living and use FIRESTORMTM branded products or any of Black & Decker’s other Consumer Home Use tools ON THE JOBSITE you should know that they CANNOT BE COVERED UNDER OUR

WARRANTY.

Imported by

Black & Decker (U.S.) Inc.,

701 E. Joppa Rd.

Towson, MD 21286 U.S.A.

www.FireStormTools.com

1-800-544-6986

See ‘Tools-Electric’

– Yellow Pages –

for Service & Sales

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents
FS200SD 10 Table SAW Before Returning this Product for ANYTable of Contents Safety Guidelines Definitions California PropositionGeneral Safety Rules Important Safety InstructionsAdditional Specific Safety Rules Power Connections Grounding InstructionsCarton Contents Functional DescriptionParts Assembly Tools Required AssemblyUnpacking and Cleaning Elevating and Supporting Surfaces for a SAW with no StandAttaching Miter Gauge Holder Miter GaugeSAW to Stand Assembling StandAttaching the BAG Attaching Blade Height Adjusting Handwheel Attaching Blade Guard and Splitter AssemblyOn the screw L Fig Assembling RIP Fence Operational Controls and Adjustments OperationTo Adjust Positive Stop AT 45 Degrees Blade Tilt Adjustment45 Degree Positive Stop Adjustments RIP Fence Operation Adjustments Table Insert AdjustmentMiter Gauge Operation Adjustments Adjusting Blade Parallel to Miter Gauge SlotsCROSS-CUTTING Machine USEChanging the Blade Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTING RippingGuard Removed for CLARITY. Always USE the Guard Using Auxiliary Wood Facing on RIP FenceAccessory Dado Cutterhead Page Push Stick Constructing a Push StickConstructing a Featherboard Troubleshooting WHAT’S WRONG? What to DO…Service MaintenanceAccessories WarrantyScie Circulaire À Table DE 254 MM 10 PO FS200SD Conserver CES Directives Lignes Directrices EN Matière DE Sécurité DéfinitionsProposition 65 DE LA Californie Règles Générales DE Sécurité Directives DE Sécurité ImportantesRègles DE Sécurité Spécifiques Supplémentaires Pour Éviter L’EFFET DE RebondConnexions Électriques Directives DE Mise À LA TerreRallonges Électriques Description FonctionnelleContenu DU Carton IntroductionOutils Nécessaires Pour L’ASSEMBLAGE AssemblageDésemballage ET Nettoyage Surfaces DE Levage ET DE Support Pour UNE Scie Sans SocleAssemblage DU Socle Fixation DU PORTE-JAUGE À OngletJauge À Onglet Fixation DU SACCommandes ET Réglages Opérationnels FonctionnementRéglages DES Butées Fixes À 90 ET 45 Degrés Réglage DE LA Hauteur DE LA LameRéglage DE L’INCLINAISON DE LA Lame Utilisation ET Réglages DU Guide LongitudinalChangement DE LA Lame Utilisation DE LA MachineUtilisation ET Réglages DE LA Jauge À Onglet TronçonnageSciage EN Long Utiliser LE Dispositif DE ProtectionFraise Accessoire À Rainurer « Fabrication DUN Poussoir »Fabrication D’UNE Planche EN Éventail DépannageEntretien Accessoires Sierra DE Banco FS200SD Pautas DE SEGURIDAD/DEFINICIONES Proposición DE CaliforniaNormas Generales DE Seguridad Instrucciones Importantes Sobre SeguridadReglas DE Seguridad Adicionales Para Sierra DE Mesa Evite EL RetrocesoConexiones a LA Fuente DE Alimentación Instrucciones DE Conexión a TierraCordones DE Extensión Instrucciones DE FuncionamientoContenido DE Carton Cordón DE Extensión DE Calibre MínimoHerramientas DE Ensamblaje Requeridas EnsamblajeDesempaquetado Y Limpieza EL VIO Apoyo Debe SER Fijo Y Capaz DE Sostener 300 LibrasMontaje DE LA Base DE Soporte Ensamblado DEL Portador DE LA Escuadra DE IngletesEscuadra DE Ingletes Sierra QUE EnsamblaEnsamblado DE LA Guia DE Corte a LO Largo Ensamblado DEL Volante DE Inclinacion Y Elevado DE HojaEnsamblado DEL Ensamblaje DE Protector DE Hoya Y Hendidor Operación Controles Y Ajustes OperacionalesFuncionamiento Y Ajustes DE LA Escuadra DE Ingletes Funcionamiento Y Ajustes DE LA Guia DE Corte a LO LargoAjuste DEL Inserto Para Mesa Realización DE Cortes Transversales Utilizar LA MaquinaCambio DE LA Hoja Realización DE Cortes AL HiloFresa DE Ranurar Accesoria Palo DE EmpujarConstrucción DE UN Palo DE Empujar Construcción DE UNA Tabla DE Canto BiseladoFalla EN EL Encendido Detección DE ProblemasMantenga LA Máquina Limpia Réparation Para Otras Localidades Llame AL 55 5326Page
Top Page Image Contents