Operation
Common Procedures
Trigger Lock
Follow the Pressure Relief Procedure whenever you see this symbol.
Always engage the trigger lock when you stop spraying to prevent the sprayer from being triggered accidentally by hand, or if dropped or bumped.
ti19350a
Trigger Locked
ti19374a
Trigger Unlocked (red ring is visible)
Prime/Pressure Relief Valve Position
Pressure Relief Procedure
Do not operate or spray near children. Do not aim the sprayer at, or spray any person or animal. Keep hands and other body parts away from the discharge. For example, do not try to stop the paint flow with any part of the body.
This sprayer builds up an internal pressure of 4000 psi during use. This equipment stays pressurized until pressure is manually relieved. To help prevent serious injury from pressurized fluid, such as skin injection, splashing fluid and moving parts, follow the Pressure Relief Procedure when you stop spraying and before cleaning, checking, or servicing the equipment.
1. Engage trigger lock.
ti19350a
2.Put prime/pressure relief valve UP to release pres- sure.
ti19347a
Spray Tip Position
Always perform Pressure Relief Procedure before adjusting spray tip position.
| ti19346a |
ti19347a |
|
UP position | DOWN position |
(For priming and releasing | (Ready to spray) |
pump pressure) |
|
ti14ti19371a85a | ti14ti19370a91a |
|
Tip Forward | Tip Reversed | ti15510a |
(SPRAY position) | (UNCLOG position) |
|
3A2308C | 9 |