Operation / 操作
ti13642a |
ti11810a |
ti11811a |
English |
17.Remove and thoroughly clean applicator, spray tips and guard with brush.
18.Clean hardened material from applicator nozzles with air nozzle cleaner.
NOTICE
Do not use air nozzle cleaner to clean applicator check valve or airless spray tip. Damage will occur.
Remove air check valve from applica- tor to clean hardened material from interior of applicator.
中文
17.卸下并用刷子彻底清洗喷涂器、 喷嘴及护罩。
18.用空气喷嘴清洁器清除喷涂器喷 嘴上的已硬化的涂料。
注意
不要使用空气喷嘴清洁器来清除喷涂器止 回阀或无气喷嘴。否则会发生损坏。
若需清除喷涂器内的已硬化的涂料，要从 喷涂器上卸下空气止回阀。
313483A | 29 |