Bosch Power Tools 400 Series XPR manual Assembly, Changing Collets, Changing Accessories

Page 8

ASSEMBLY

! WARNING Always unplug rotary tool before changing accessories, changing collets, or servicing the tool.

		Collets
The Dremel™ accessories available for the
rotary tool come with various shank sizes.
Four size collets are available to accommodate
the different shank sizes. Collet sizes are iden-			1/8" Collet (480)
tified by the rings on the back of the collet:
• 1/32" collet has 1 ring (No. 483)			3/32" Collet (481)
•	1/16" collet has 2 rings (No. 482) Collet Nut		1/16" Collet (482)
• 3/32" collet has 3 rings (No. 481)			1/32" Collet (483)
• 1/8" collet has no rings (No. 480)
NOTE: Some rotary tool kits may not include all
four collet sizes. Collets are available separately.
!	CAUTION	Always use the collet which matches the shank size of the accessory you
		plan to use. Do not force a larger diameter shank into a smaller collet.

Changing Collets

1. Press the shaft lock button, hold down and rotate the shaft by hand until it engages the shaft.

! WARNING Do not engage the shaft tool is running.lock button while rotary 2. With the shaft lock button engaged, loosen and remove the collet nut. Use

the collet wrench if necessary.

3. Remove the collet by pulling it free from the shaft.

4. Install the appropriate size collet fully into the shaft and reinstall the collet nut finger tight. Do not fully tighten the nut when there is no bit or accessory installed.

Changing Accessories

1. Press the shaft lock button and rotate the shaft by hand until it engages the shaft lock.

! WARNING Do not engage the shaft tool is running.lock button while rotary 2. With the shaft lock button engaged, loosen (do not remove) the collet nut.

Use the collet wrench if necessary.

3. Insert the bit or accessory shank fully into the collet.

4. With the shaft lock button engaged, fin- ger tighten the collet nut until the bit or accessory shank is gripped by the collet.

Shaft Lock Button

To

Tighten

Collet Wrench	Collet Nut

To

Loosen

Shaft Lock Button

NOTE: Be sure to read the instructions supplied with your Dremel™ accessory for further information on its use.

8

Image 8

Contents Series XPR Power Tool Safety Rules Personal SafetyElectrical Safety Tool Use and CareSafety Rules for Rotary Tool ServiceComplete stop it is safe to put it down Description Unpacking & Checking ContentsGetting to Know Your Rotary Tool Specifications General SpecificationsMotor Specifications Connection To a Power SourceSymbols Symbol Name Designation/ExplanationAssembly Changing AccessoriesCollets Changing ColletsLearning To Use the Rotary Tool OperationKeyless Chuck Switch Setting Speed Range RPM Operating SpeedsHigh Speed Cutters Engraving CuttersDiamond Wheel Points Structured Tooth Tungsten Carbide CuttersSpeed Settings Abrasive PointsCutting Accessories Polishing AccessoriesSanding Bands and Discs FlapwheelsMaintenance Carbon BrushesCleaning The Tool Position Figure CAccessories Wire Brushes High Speed CuttersStructured Tooth Tungsten Carbide Cutters Bristle BrushesAttachments XPR MultiSawXPR Planer Flex LightFlex Shaft Plunge RouterGrout Removal Cutting GuideLawn / Garden Sharpener Chain Saw SharpenerRight Angle DremeliteFlex Shaft Tool Holder Tool Holder and BaseService Parts & Diagram DescriptionDremel Limited Warranty CanadaPage Série XPR Aire de travail Consignes de sécurité pour outils rotatifs Consignes de sécurité pour outils rotatifs Familiarisation Avec Loutil Rotatif Déballage et contrôle du contenuCaractéristiques Techniques Caractéristiques techniques du moteurBranchement sur lalimentation RallongesSymboles Changement daccessoires AssemblageBagues de serrage Changement de bague de serrageMode demploi de loutil rotatif Assemblage SuiteUtilisation Mandrin auto-serrantRéglage Utilisation SuiteRégimes dexploitation Fraises à haut régime Fraises à graverMeules diamants Fraises en carbure de tungstène à dents structuréesPointes abrasives Sélection DUN Régime SuiteMeules en carbure de silicium Tampons abrasifs de finition ForetManente EntretienBrosses en carbone Pour toute question ou obtenir des Entretien SuiteNettoyage de loutil Accessoires Accessoires Suite Accessoires de ponçage Outils AnnexesMeules abrasives en oxyde Daluminium XPR RaboteuseAttachements Suite Toupie à pistonRetrait de mortier Guide de coupeOutils Annexes Suite Affûteuse doutils de jardinAffûteuse de scie à chaîne Angle droitPorte-outil Flex Shaft Porte-outil et basePièces Détachées ET Diagramme Légende No de réfRacine, WI Dremel Service Center 4915 21st StreetGarantie Limitée Dremel Page Manual de instrucciones Seguridad personal Normas DE Seguridad Para Herramientas MecánicasSeguridad eléctrica Normas DE Seguridad Para Herramientas Giratorias Normas DE Seguridad Para Herramientas Giratorias Empaque. Descripción Familiarícese CON SU Herramienta RotatoriaDesempaque y revisión del contenido Especificaciones Cables de extensiónSímbolos Montaje CollarinesCambio de collarines Diámetro mayor en un collarín de tamaño menorMontaje Continuación OperaciónManguito portaherramientas sin llave Aprenda a usar la herramienta rotatoriaOperación Continuación Velocidades de operaciónAjuste Del conmutador Velocidad RPMEstructurados Ajustes DE Velocidad Continuación Esmeriladoras de carburo de silicioPuntas abrasivas Esmeriladoras de óxido de aluminioAcabado Brocas de extracción de LechadaMantenimiento Instalación de las escobillasMantenimiento Continuación Limpieza de la herramientaAccesorios Accesorios Continuación Aditamentos Accesorios de lijadoMuelas abrasivas de óxido de Muela abrasiva Aluminio XPR CepilladoraAditamentos Continuación Eje flexibleBurilador de pistón Remoción de lechadaÁngulo recto Afiladora de equipo de césped y jardínAfiladora de sierras de cadena Portaherramienta de eje flexible Sujetador y base para la herramientaPieza N.º Descripción Piezas DE Servicio Y DiagramaPieza N.º Garantía limitada de Dremel Estados UnidosNota