Figure 13. Rear View of the Enclosure Showing the Failed Cooling Fan
Replacing a Power Supply/Cooling Fan Module
Use this procedure to replace a failed power supply/cooling fan module.
Prerequisites
1.Use SupportAssist to send diagnostic data to Dell Technical Support Services.
About this task
You can replace power supply/cooling fan modules one at a time without shutting down the storage system.
Steps
1.Press the power switch on the power supply/cooling fan module to turn it off.
2.Remove the
3.Push the release tab on the power supply/cooling fan module and slide it out of the chassis using the handle.
CAUTION: The power supply/cooling fan modules are heavy. To avoid injury, use both hands while removing the module.
Replacing SCv2000/SCv2020 Components | 23 |