Dell E10J, E09J owner manual Post-Replacement Procedures, Start up the Storage System

Page 36

Post-Replacement Procedures

After replacing a component in the SCv2000/SCv2020 storage system, start up the storage system if it was previously shut down and use SupportAssist to send diagnostic data to Dell Technical Support Services.

Start up the Storage System

If the storage system was previously shut down, perform this procedure to start it up.

1.Plug the power cables into the power supply/cooling fan modules of the storage system.

2.Turn on the storage system by pressing the power switches on the power supply/cooling fan modules.

NOTE: When the SCv2000/SCv2020 storage system is powered on, there is a one-minute delay while the SCv2000/SCv2020 prepares to boot. During this time, the only indication that the SCv2000/SCv2020 is powered on are the LEDs on the storage controllers. After the one- minute delay, the SCv2000/SCv2020 fans and LEDs turn on as an indication that the storage system is starting to come up.

3.Use the Dell Storage Client to make sure the replacement part is recognized and shown as up and running.

Sending Diagnostic Data Using Dell SupportAssist

Use Dell SupportAssist to send diagnostic data to Dell Technical Support Services.

1.Click Send SupportAssist Data Now. The Send Support Assist Data Now dialog box appears.

2.Select Storage Center Configuration and Detailed Logs.

3.Click OK.

36	Replacing SCv2000/SCv2020 Components

Image 36

Contents Dell Storage Center Page Contents Troubleshooting SCv2000/SCv2020 Components SCv2000/SCv2020 Technical SpecificationsRevision History Audience Contacting DellRelated Publications Dell Enterprise Manager Administrator’s Guide SCv2000/SCv2020 Monitoring and Diagnostics SCv2000/SCv2020 Storage System HardwareSCv2000 Front Panel View SCv2000/SCv2020 Back-Panel Features and Indicators SCv2000/SCv2020 Back Panel ViewSCv2000/SCv2020 Storage Controller Features and Indicators About the SCv2000/SCv2020 Storage System About the SCv2000/SCv2020 Storage System About the SCv2000/SCv2020 Storage System SCv2000/SCv2020 Storage Controller with SAS Front-End Ports SCv2000/SCv2020 Drive Indicators SCv2000/SCv2020 DrivesAbout the SCv2000/SCv2020 Storage System Safety Precautions Installation Safety PrecautionsElectrical Safety Precautions Electrostatic Discharge PrecautionsGeneral Safety Precautions Pre-Replacement Procedures Sending Diagnostic Data Using Dell SupportAssistShutting Down a Storage Controller Shutting Down the Storage SystemReplacing Power Supply/Cooling Fan Modules Identifying the Failed Power SupplyReplacing the Front Bezel Page Identifying the Failed Cooling Fan Replacing a Power Supply/Cooling Fan Module Rear View of the Enclosure Showing the Failed Cooling FanRemoving a Power Supply/Cooling Fan Module Replacing Hard Drives SCv2000/SCv2020 Storage System Drive NumberingIdentifying the Failed Hard Drive Front View of the Enclosure Showing the Failed Hard Drive Replacing a Hard Drive Replacing a Hard DriveInstall Hard Drives in Storage System Replacing the Storage Controller Battery Replacing a Storage ControllerIdentify the Failed Storage Controller Replace a Single Storage Controller Replacing a Storage Controller Replace Both Storage Controllers in Succession Replacing a Storage Controller Replacing Rack Rails Replace Both Storage Controllers SimultaneouslyPost-Replacement Procedures Start up the Storage SystemTroubleshooting Power Supply/Cooling Fan Modules Troubleshooting Hard DrivesTroubleshooting Storage Controllers SCv2000/SCv2020 Technical Specifications Technical SpecificationsSCv2000/SCv2020 Technical Specifications Hour SCv2000/SCv2020 Technical Specifications