FEATURES
PRODUCT SPECIFICATIONS
Grinding Wheel Capacity | |
Motor | 18 Volt DC |
KNOW YOUR ANGLE GRINDER
See Figure 1, page 12.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
LOCK-OFF BUTTON
Your grinder is equipped with a
No Load Speed | 6,500 r/min. (RPM) |
Spindle Thread | 5/8 x 11 UNC |
SIDE HANDLE WITH WRENCH STORAGE
The side handle can be installed on the top, left, or right side of the grinder for stabilization and must be used during all operations. The wrench can be conveniently stored in the side handle storage slot when not in use.
SPINDLE LOCK
The spindle lock secures the spindle so that only one wrench is needed to change the grinding wheel.
TOOLLESS GUARD
A toolless guard deflects sparks and metal chips during use.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.
7 — English