(8) Frequency (for
Range | Resolution | Sensitivity | Accuracy | |
|
|
|
| |
10.00Hz | 0.01Hz |
|
| |
100.0Hz | 0.1Hz |
|
| |
1.000KHz | 1Hz | 0.7V rms * | Frequency: | |
10.00KHz | 10Hz | |||
| (± 0.1% + 3 digit) | |||
100.0KHz | 100Hz |
| ||
|
| |||
1.000MHz | 10KHz |
|
| |
4.000MHz | 10KHz | 3.0V rms |
|
Page 7
Overload
protection
600V rms
(9) Temperature: Type K thermocouple (for
Range | Resolution | Accuracy |
|
|
|
1ºC | ±3.0% ± 3 ºC | |
1ºF | ±3.0% ± 5 ºF |
(10) Auto Power Off (APO)
Overload
protection
Not Specified
If the meter idles for more than ≈ 10 minutes, the meter automatically turns the power off.
(11) Data Hold/Backlight
Press this button less than 2 seconds the meter enter data hold mode and “ HOLD ” symbol appear on LCD, and the momentary value while pressing the button display on LCD. Press it again to exit this mode and “ HOLD ” symbol disappear on display. As data hold function, this button do not effect on diode and continuity test function. The secondary function of this button is backlight enable and disable. If you press it more than 2 seconds, the backlight will be turn on and press it more than 2 seconds again will make the backlight off.
(12) SELECT
There are several functions at one rotary switch position, press SELECT button to select
function you want, It allowable to select AC or DC voltage, AC or DC current, Resistance ,Diode , Audible continuity or capacitance, ℃ or ℉ temperature measurement.
(13) RANGE
When power on, meter at auto range mode, press RANGE button you can select measurement range you want. Range is run up with times of pressing RANGE button until its max, then return the min range. Press RANGE button more than 2 seconds , the meter return to auto range. This button do not effect on frequency, duty cycle, capacitance, diode & continuity test and temperature measurement.
Form Number | Rev 2 November 2007 |