CHAPTER 2
Setup and Configuration
Installing a Line Cord Cap - U.K. Only
In the United Kingdom, core colours in the mains lead of this equipment may not correspond with the colored markings identifying the terminals in the fixture’s plug. In that case, install a line cord cap according to the following code:
•Connect the green and yellow core to the plug terminal marked with the letter “E,” or by the earth symbol 
or coloured green, or green and yellow.
•Connect the blue core to the terminal marked with the letter “N” or coloured black.
•Connect the brown core to the terminal marked with the letter “L” or coloured red.
WARNING:
Class 1 equipment - This equipment must be earthed.
Vatic Fitter Heads Information - Danmark
Advarsel: Beskyttelse mod elektrisk chock.
Vigtigt!
Lederne med gul/groen isolation maa kun tilsluttes en klemme maerket | eller |
|
Mounting the Fixture
You can mount your StudioPix™ fixture suspended from a support system (such as a truss) or freestanding on its base.
WARNING!
Equipment suitable for dry locations only. Do not expose this equipment to rain or moisture.
CAUTION!
Always use a secondary safety cable when mounting this fixture. This fixture must be installed and operated by trained personnel only.
| 1 | m | Maintain a minimum focus distance of 1 meter from a lighted object. |
| |||
|
|
|
|
Note: | Due to the wide variety of possible lighting designs, High End | ||
|
|
| Systems cannot make specific mounting recommendations. Consider |
|
|
| the following procedure as a suggested guideline only. |
Mounting the Fixture Upright
CAUTION!
Do not mount the fixture upright without the four rubber feet attached.
To mount the fixture upright, place the fixture on a sturdy, stable
8 | StudioPix™ Pixelation Luminaire User Manual |