CHAPTER 10 Effect Descriptions
Target Scan
Image Effect | Global Effect |
Effect Function parameter DMX value = 5
Selecting the Target Scan effect creates a transparent pattern on the image that simulates rings that scan across the fixture array from the perimeter in or the center out. This effect responds according to the values set in the Transparent Color parameter, see Transparent Color on page 43.
Modifier 1 : Adjusts the size of the visible target ring from no pixels wide at a DMX value = 0 to one pixel less than the total pixel width of the array at a DMX value = 255 (100%).
Modifier 2 : Adjusts the speed of the target scan. At a DMX value = 129 (50%), the ring is static. As you decrease the DMX value from the midpoint the rings move from the perimeter toward the center of the array with the speed increasing to a maximum at a DMX value = 0. As you increase the DMX value from the midpoint the rings move from the center toward the perimeter of the array with the speed increasing to a maximum at a DMX value =255 (100%).
Effect Function = 5 | Effect Function = 5 | Effect Function = 5 | |||
Modifier 1 | = 0 | Modifier 1 | = 210 (83%) | Modifier 1 | = 255 (100%) |
Modifier 2 | = | Modifier 2 | = | Modifier 2 | = |
74 | StudioPix™ Pixelation Luminaire User Manual |