CHAPTER 10 Effect Descriptions
Bar Scan
Image Effect | Global Effect |
Effect Function parameter DMX value = 4
Selecting the Bar Scan creates a transparent pattern on the image that simulates a vertical line that scans across the fixture array. This effect responds according to the values set in the Transparent Color parameter, see Transparent Color on page 43.
Modifier 1: Adjusts the width of the bar from a single “pixel” wide at a value of to the full width of the array minus one pixel.
Modifier 2: Adjusts the scan rate. At the midpoint of the range (DMX
Effect Function = 4 | Effect Function = 0 | Effect Function = 0 | |
Modifier 1 = 0 | Modifier 1 | = 158 (23%) | Modifier 1 = 255 (100%) |
| Modifier 2 | = |
|
Brightness and Contrast
Image Effect | Global Effect |
Effect Function parameter DMX value = 8
This effect will adjust the brightness and/or contrast of the visible image to create either a more pastel or a richer color.
Modifier 1: Adjusts the brightness of the image. At DMX value = 128 (50%) there is no adjustment. DMX values below the midpoint of the range decrease the brightness to a minimum at a DMX value = 0. DMX values above the midpoint of the range increase the brightness to a maximum at a DMX value of 255 (100%).
Modifier 2: Adjusts the contrast of the image. At DMX value = 128 (50%) there is no adjustment. DMX values below the midpoint of the range decrease the contrast to a minimum at a DMX value = 0. DMX values above the midpoint of the range increase the contrast to a maximum at a DMX value of 255 (100%).
68 | StudioPix™ Pixelation Luminaire User Manual |