Internal Components
| C | D | E | F |
|
|
|
| |
A | B |
|
| G |
|
|
| ||
|
|
|
| |
| Workpiece |
|
|
|
| H |
|
| I |
|
|
|
| H |
Figure 2. Workpiece path and major planing components (side cutaway view).
A.Anti-Kickback Fingers: Provide additional safety for the operator.
B.Serrated Infeed Roller: Pulls the workpiece toward the cutterhead.
C.Chip Breaker: Breaks off chips created by the cutterhead to prevent tear out and diverts the chips to the dust port.
D.Chip Deflector: Directs chips into the dust hood.
E.Cutterhead: Holds the knives that remove material from the workpiece.
F.Pressure Bar: Stabilizes the workpiece as it leaves the cutterhead and assists in deflect- ing wood particles toward the dust hood (G0454 only).
G.Outfeed Rollers: Pulls the workpiece through the planer.
H.Table Rollers: Provide upward pressure on the workpiece enabling the feed rollers to pull the workpiece along.
I.Planer Table: Provides a smooth and level path for the workpiece as it moves through the planer.
Like all machinery there is potential danger when operating this machine. Accidents are fre- quently caused by lack of familiarity or failure to pay attention. Use this machine with respect and caution to decrease the risk of operator injury. If normal safety precautions are overlooked or ignored, serious personal injury may occur.
G0453/G0454 (Mfg. Since 3/08) |