Remington 495 operating instructions Assembling Barrel Assembly Montage DE L’ENSEMBLE DE Canon

Page 35

F.ASSEMBLING BARREL ASSEMBLY MONTAGE DE L’ENSEMBLE DE CANON

1.Insert piston assembly into barrel (see Figure 17).

Insérer l’ensemble de piston dans le canon (voir figure 17).

Piston

Piston

Barrel

Canon

Figure 17 - Inserting Piston in Barrel

Figure 17 - Pose du piston dans le canon

2.Insert buffer in muzzle cap.

Insérer le butoir dans l’embout de bouche.

3.Screw muzzle cap to barrel assembly.

Visser l’embout de bouche sur l’ensemble de canon.

4.Insert barrel into outer liner assembly (see Figure 18). Insérer le canon dans la garniture extérieure (voir figure 18).

Barrel

Canon

Buffer

Butoir

Muzzle Cap

Embout de

boucheOuter Liner Assembly Garniture extérieure

Piston

Piston

Figure 18 - Inserting Barrel Assembly into Outer Liner Assembly Figure 18 - Pose de l’ensemble de canon sur la garniture exté rieure

5.Insert stop into slot on outer liner assembly (see Figure 19).

Insérer la butée dans la fente de la garniture extérieure (voir figure 19).

Stop

Butée

Outer Liner Assembly

Garniture extérieure

Figure 19 - Replacing Stop

Figure 19 - Pose de la buté e

101719

35

Image 35
Contents Operating Instructions Mode d’emploi Index Remington Avertissement Mesures de précautions Safety Precautions Mesures de pré cautions Handling the Tool Manipulation DE L’OUTIL Powd Safety Precautions Mesures de pré cautions ? ? Tile Brick Glasscarrelage Brique Weld Soudure Utilisation DE L’OUTIL Power Loads and Fasteners Charges ET Fixations Endommager l’outil voir Power Load Strips Only Charges DE Poudre Seulement Head Shank Tê te Tige Plastic Flute Cannelure de plastique Why a Power Fastener Holds Pourquoi les fixations tiennent WHY a Power Fastener Holds in Steel Fastening Into Concrete Overdriven Power Fasteners and Piston Operation Utilisation Operation Operation Key Part Description Parts List 495101719 Code Piè ce Description Liste de piè ces 495Cleaning and Maintenance Nettoyage et entretien Removing Barrel Assembly DÉ Pose DE L’ENSEMBLE DE Canon Tool Disassembly Dé sassemblage du pistoletSeparating Barrel Assembly from Housing Removing Handle Pad Assembly and Rear Pad Removing Firing PIN DÉ Pose DU Percuteur Removing Trigger Assembly DÉ Pose DE L’ENSEMBLE DE DÉ TenteTool Assembly Assemblage du pistolet Suite Replacing Handle Pad Assembly and Rear Pad Inserting Piston in Barrel Assembling Barrel Assembly Montage DE L’ENSEMBLE DE CanonPushing Stop towards Front of Tool Problem Possible Cause Remedy Troubleshooting GuideDé pannage Problè ME Cause Possible SolutionSP Fasteners Fixations SP Fasteners FixationsApplication Chart Tableau d’application 482-90 Application Chart Tableau d’applicationDesa Industries Canada, Inc Limited Warranty AgreementAccord de garantie limité e