Husqvarna SG13B manual Movement/Transport, Storage, Children

Page 10

SAFETY

Movement/Transport

To turn and steer the machine, press down on the handle and turn on the back wheels.

Turn off the engine and allow it to cool at least two minutes before transport.

Fold the handle down if the machine is equipped with a collapsible handle.

Use safe lifting and moving techniques when loading/unloading the machine.

It is recommended that two people lift the machine.

Activate the parking brake during transport.

Fasten the machine properly in place with approved fasteners, such as tension belts, chains or straps. Always check for compliance with applicable traffic regulations before transporting the machine.

Storage

Allow the engine to cool before storing the machine. Never store the machine near a open flame.

Store the machine with the fuel valve closed.

Store the machine and fuel in such a way that there is no risk that leaking fuel or fumes can come in contact with flames or sparks from electrical machines, electric engines, relays, switches, boilers or similar.

Store the machine in a locked space away from children and adults untrained in its use.

Children

Serious accidents can occur if you fail to be on guard for children in the vicinity of the machine. Never assume that children will stay where you last saw them.

Keep children away from the machine.

Keep children away from the work area and under close supervision by another adult.

Shut off the machine if children enter the work area.

Never allow children to operate the machine.

Be particularly careful near corners, bushes, trees or other objects that obstruct view.

8011-278b

Lift the machine with the side handles.

8011-207c

Keep children away from the machine.

8011-206b

Never allow children to operate the machine.

HUSQVARNA-11

Image 10
Contents Operator Manual Contents Introduction Xxxx xxx xxxx xx xxxx x Decals and machine-mounted instructionsDecal Important information DecalSafety General useSafety Preparations Operating Storage Movement/TransportChildren Fuel System Maintenance Protection equipment Personal Protection EquipmentSET-UP Remove air cleaner and double wire clamp from engine Engine Controls Main Components and ControlsEngine Speed Control LeverFuel Valve StarterStarter Handle Choke ControlSpark Plug Air FilterMuffler Oil Dipstick Oil DrainFueling Fuel TankCentrifugal Clutch Operator Presence OP Grip Bar Control Panel On/Off Engine SwitchThrottle Handle Adjustment Bar BrakeOperation PreparationChoke control Starting The EngineFuel valve ThrottleEngine ON/OFF Switch Handle Engine SwitchOP Grip Bar Procedure Set the handle throttle to Fast to engage clutch Operating On Hills TransportEmergency Shutdown Engine switchNormal Shutdown BrakeMaintenance Maintenance ScheduleCyclone Filter HUSQVARNA-35 Sludge Reservoir Idle Adjustment Ignition System Fitting the wrong spark plug type can damage the engineDrive Belt Cutting Wheel Left Wheel Brake AdjustmentRemoving/Refitting Wheels Right WheelCleaning Two Minute RuleLubrication Engine Oil Throttle cable Right wheelChecking Engine Oil Level Engine will not start TroubleshootingEngine is weak or runs unevenly Belt engages late or slips Belt not staying tight after adjustmentBelt comes off Cutting wheel does not rotateService Winter StorageModel SG13B Technical DataDimensions EngineSchematics Service Journal Delivery serviceService Journal HUSQVARNA-53 Service Journal Limited Warranty Husqvarna S Obligations Under the Warranty 115 151327 IR 03/03/09