Husqvarna SG13B manual Brake, Handle Adjustment Bar

Page 24

CONTROLS

Brake

The lever activates a disk brake on the left wheel when it is pulled backwards. The brake should always be activated when the grinder is parked, is being transported or when it is in operation

WARNING!

NEVER operate a machine with a defective brake.

WARNING!

To avoid the risk of losing control of the machine, DO NOT pull out the adjustment bar when the cutting wheel is rotating.

Handle Adjustment Bar

As the tree stump is ground away, the handle position will need to be adjusted. Pull the handle backwards and set the handle at a suitable working height. Engagement rods are spring loaded to insure positive locking when released, but always make sure bolts are locked into place after adjustments are made.

HUSQVARNA-25

Image 24

Contents Operator Manual Contents Introduction Xxxx xxx xxxx xx xxxx x Decals and machine-mounted instructionsDecal Important information DecalSafety General useSafety Preparations Operating Movement/Transport StorageChildren Fuel System Maintenance Protection equipment Personal Protection EquipmentSET-UP Remove air cleaner and double wire clamp from engine Engine Controls Main Components and ControlsEngine Speed Control LeverStarter Starter HandleFuel Valve Choke ControlAir Filter Spark PlugMuffler Oil Dipstick Oil DrainFuel Tank FuelingCentrifugal Clutch Control Panel On/Off Engine Switch Operator Presence OP Grip BarThrottle Handle Adjustment Bar BrakeOperation PreparationStarting The Engine Fuel valveChoke control ThrottleHandle Engine Switch Engine ON/OFF SwitchOP Grip Bar Procedure Set the handle throttle to Fast to engage clutch Operating On Hills TransportEngine switch Normal ShutdownEmergency Shutdown BrakeMaintenance Maintenance ScheduleCyclone Filter HUSQVARNA-35 Sludge Reservoir Idle Adjustment Ignition System Fitting the wrong spark plug type can damage the engineDrive Belt Cutting Wheel Brake Adjustment Removing/Refitting WheelsLeft Wheel Right WheelCleaning Two Minute RuleLubrication Engine Oil Right wheel Throttle cableChecking Engine Oil Level Troubleshooting Engine will not startEngine is weak or runs unevenly Belt not staying tight after adjustment Belt comes offBelt engages late or slips Cutting wheel does not rotateService Winter StorageTechnical Data DimensionsModel SG13B EngineSchematics Service Journal Delivery serviceService Journal HUSQVARNA-53 Service Journal Limited Warranty Husqvarna S Obligations Under the Warranty 115 151327 IR 03/03/09