Delta 23-198, 23-199 instruction manual Safety Guidelines Definitions, General Safety Rules

Page 3

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these sections.

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

GENERAL SAFETY RULES

WARNING FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY.

•FOR YOUR OWN SAFETY, READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE OPERATING THE UNIT. Learn the unit’s application and limitations as well as the specific hazards peculiar to it.

•KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.

•DON’T USE IN DANGEROUS ENVIRONMENT. Don’t use this unit in damp or wet locations, or expose it to rain. Keep work area well-lighted.

•KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.

•DISCONNECT UNIT before servicing.

•CHECK DAMAGED PARTS. Before further use of the unit, properly repair or replace any part that is damaged.

FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS INJURY.

1.Read and understand the warnings posted on the machine and in this manual. Failure to comply with all of these warnings may cause serious injury.

2.Replace the warning labels if they become obscured or removed.

3.This machine is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a band saw, do not use until proper training and knowledge have been obtained.

4.Do not use this machine for other than its intended use. If used for other purposes, DELTA® Power Equipment Corporation disclaims any real or implied warranty and holds itself harmless from any injury that may result from that use.

5.Always wear approved safety glasses/face shiiellds while using this grinder.

6.Before operating this grinder, remove tie, riings,, watches and other jewelry, and roll sleeves up past the elbows. Remove all loose clothing and confine long hair. Non-slip footwear or anti-skid floor strips are recommended. Do not wear gloves.

7.Wear ear protectors (plugs or muffs) during extended periods of operation.

8.Some dust created by power sanding, sawing, grinding, drilling and other construction activities

contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•Lead from lead based paint.

•Crystalline silica from bricks, cement and other masonry products.

•Arsenic and chromium from chemically treated lumber.

Your risk of exposure varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well-ventilated area and work with approved safety equipment, such as face or dust masks that are specifically designed to filter out

microscopic particles.

9.Do not operate this machine while tired or under the influence of drugs, alcohol or any medication.

10.Make certain the switch is in the OFF position before connecting the machine to the power source.

11.Make certain the machine is properly grounded.

12.Make all machine adjustments or maintenance with the machine unplugged from the power source.

continued on page 4

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Variable Speed Grinder Important Safety Instructions Table of ContentsGeneral Safety Rules Safety Guidelines DefinitionsAdditional Specific Safety Rules Refer to them often and use them to instruct others All grounded, cord-connected machines POWER CONNECTIONSMotor Specifications Grounding InstructionsKEY Features and Components Functional DescriptionEXTENSION CORDS Unpacking Product SpecificationsRefer to Figure AssemblyAttach Spark Shield and Grinding Shield Attach Tool RestConfirm Tightness of Arbor Nuts Tool StorageStarting And Stopping Using the Variable Speed ControlUsing the Flexible Lamp OperationMaintenance Grinding WheelsDressing the Wheels Other Recommended Maintenance Disconnect the machine from the power sourceReplacing or Changing Grinding Wheels Accessories WarrantyFive Year Limited New Product Warranty Service and Repairs Replacement PartsConsignes DE Sécurité Définitions Consignes DE Sécurité ImportantesSuite à la Règles DE Sécurité GénéralesRègles DE Sécurité Spécifiques Supplémentaires Conservez CES Consignes Raccordements Électriques Spécifications DU MoteurInstructions DE Mise À LA Terre Caractéristiques ET Composantes Importantes Description FonctionnelleRallonges Déballage Caractéristiques DU ProduitConsultez la Figure MontageAttacher le pare-étincelles et la visière Attacher le porte-outilsConfirmer le serrage des écrous de larbre Stockage de loutilVerrouillage de lappareil Utilisation de la commande de vitesse variableFonctionnement Démarrage et ArrêtPar DeltaMD peut entraîner un risque de blessures EntretienMeules Dressage des meulesAutre entretien recommandé Remplacer ou changer les meulesDéconnectez lappareil de la source dalimentation Accessoires GarantieGarantie limitée de cinq ans pour les produits neufs Service ET Réparations Aide Pour LES PIÈCES, LE Service OU LA GarantieNormas DE Seguridad Definiciones Instrucciones Importantes DE SeguridadContinúa en la página Reglas Generales DE SeguridadReglas Específicas DE Seguridad Adicionales Guarde Estas Instrucciones Conexiones DE Alimentación Especificaciones DEL MotorInstrucciones DE Conexión a Tierra Características Y Componentes Clave Descripción FuncionalAlargadores Eléctricos Desempaque Especificaciones DEL ProductoEnsamble Instalación del soporteConsulte la Figura Confirmar que las tuercas del eje estén apretadas Almacenamiento de herramientasUso del control de velocidad variable FuncionamientoArranque y paro Bloqueo de la máquinaDelta puede ocasionar riesgo de lesiones MantenimientoMuelas rectificadoras Limpieza de las muelasOtro mantenimiento recomendado Reemplazo o cambio de muelas rectificadorasDesconecte la máquina de la fuente de poder Accesorios GarantíaGarantía de producto nuevo limitada a cinco años Servicio Técnico Y Reparaciones Asistencia Sobre GARANTÍA, Servicio O PiezasAirport Road Anderson, SC 800

23-199, 23-198 specifications

Delta 23-198 and Delta 23-199 are two advanced models in the Delta aircraft series, known for their cutting-edge features, technologies, and impressive performance characteristics. Designed with modern aviation demands in mind, these aircraft aim to enhance both passenger experience and operational efficiency.

One of the standout features of the Delta 23-198 and 23-199 is their aerodynamic design, which significantly reduces drag and improves fuel efficiency. The sleek fuselage, coupled with advanced wing designs, ensures optimal performance across various flight conditions. These aircraft are equipped with next-generation engines that provide greater thrust while consuming less fuel, making them highly competitive in today’s market.

Both models are constructed using lightweight composite materials, which not only contribute to overall weight reduction but also enhance structural integrity. This innovative material usage allows for higher payload capacity and longer range, making them ideal for both short-haul and long-haul operations.

In terms of cabin comfort, Delta 23-198 and 23-199 feature spacious interiors with a focus on passenger experience. Larger windows and improved cabin pressure systems create a more pleasant atmosphere, reducing fatigue during long flights. The aircraft's seating layout has been optimized to maximize comfort, with options for various classes to cater to different passenger needs.

Technologically, these models incorporate advanced avionics systems that enhance navigation and safety. The flight deck is equipped with state-of-the-art displays and automated systems that aid pilots in decision-making and improve overall situational awareness. Additionally, real-time data analytics tools are integrated into the aircraft’s operations, allowing for predictive maintenance and operational optimization.

Both aircraft are designed with sustainability in mind. They meet stringent environmental regulations and are equipped with systems that minimize noise pollution and emissions. This commitment to greener aviation technology positions Delta 23-198 and 23-199 as responsible choices for airlines looking to reduce their carbon footprint.

In summary, Delta 23-198 and 23-199 exemplify the future of aviation with their combination of efficiency, comfort, and advanced technology. Their ability to meet the evolving demands of the aviation industry while prioritizing sustainability makes them significant players in the aircraft market. Airlines looking to enhance their fleet will find that these models offer a compelling mix of performance and passenger satisfaction.
Top Page Image Contents