Additional Specific Safety Rules

13.Form a habit of checking to see that all extra equipment such as adjusting keys, wrenches, scrap, stock, and cleaning rags are removed away from the machine before turning on.

14.Keep safety guards in place at all times when the machine is in use. If removed for maintenance purposes, use extreme caution and replace the guards immediately when maintenance is complete.

15.Make sure the tool is firmly secured to a stable work surface before use.

16.Check damaged parts. Before further use of the machine, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.

17.Provide for adequate space surrounding work area and non-glare, overhead lighting.

18.Keep the floor around the machine clean and free of scrap material, oil and grease.

19.Keep visitors a safe distance from the work area. Keep children away.

20.Make your workshop child proof with padlocks, master switches or by removing starter keys.

21.Give your work undivided attention. Looking around, carrying on a conversation and “horse- play" are careless acts that can result in serious injury.

22.Maintain a balanced stance at all times so that you do not fall or lean against the tool or its moving parts. Do not overreach or use excessive force to perform any machine operation.

23.Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for which it was not designed. The right tool will do the job better and safer.

24.Use recommended accessories; improper accessories may be hazardous.

25.Maintain machinery with care. Follow instructions for lubricating and changing accessories.

26.Turn off the machine before cleaning. Use a brush or compressed air to remove dust or debris — do not use your hands.

27.Do not stand on the machine. Serious injury could occur if the machine tips over.

28.Never leave the machine running unattended. Turn the power off and do not leave the machine until it comes to a complete stop.

29.At all times, hold the stock firmly.

30.Do not use this tool for other than it intended use. If used for other purposes, DELTA® Power Equipment Corporation disclaims any real or implied warranty and holds itself harmless for any injury or damage which may result from that use.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

Failure to follow these rules may result in serious personal injury.

1.Do not operate this machine until it is completely assembled and installed according to the instructions. A machine incorrectly assembled can cause serious injury.

2.OBTAIN ADVICE from your supervisor, instructor, or another qualified person if you are not thoroughly familiar with the operation of this machine. Knowledge is safety.

3.FOLLOW ALL WIRING CODES and recommended electrical connections to prevent shock or electrocution.

4.ALWAYS USE THE PROVIDED BLOTTER and wheel flanges to mount the grinding wheels on the grinder shaft to prevent wheel damage or accidental separation. Separation can result in fragments flying off the wheel at high speeds.

5.USE ONLY WHEELS suitable for the speed of the machine. Unsuitable grinding wheels can come apart, throwing fragments out at high speeds.

6.USE ONLY WHEELS that have a bore exactly equal to the arbors of the machine. Never attempt to machine an undersized wheel to fit an arbor. Unsuitable grinding wheels can come apart, throwing fragments out at high speeds.

7.DO NOT overtighten wheel nut.

8.DO NOT USE A WHEEL THAT VIBRATES. Dress the grinding wheel, replace it, or replace the bearings of the shaft. Unsuitable grinding wheels can come apart, throwing fragments at high speeds.

9.INSPECT WHEELS before starting the machine for cracks or fragments. REPLACE DAMAGED WHEELS immediately. Parts of the wheel can be thrown at high speeds causing serious injury.

10.ADJUST EYE SHIELDS close to the grinding wheel, and re-adjust as the wheel wears down. Flying sparks are dangerous and can cause fires or explosions.

23-199, 23-198 specifications

Delta 23-198 and Delta 23-199 are two advanced models in the Delta aircraft series, known for their cutting-edge features, technologies, and impressive performance characteristics. Designed with modern aviation demands in mind, these aircraft aim to enhance both passenger experience and operational efficiency.

One of the standout features of the Delta 23-198 and 23-199 is their aerodynamic design, which significantly reduces drag and improves fuel efficiency. The sleek fuselage, coupled with advanced wing designs, ensures optimal performance across various flight conditions. These aircraft are equipped with next-generation engines that provide greater thrust while consuming less fuel, making them highly competitive in today’s market.

Both models are constructed using lightweight composite materials, which not only contribute to overall weight reduction but also enhance structural integrity. This innovative material usage allows for higher payload capacity and longer range, making them ideal for both short-haul and long-haul operations.

In terms of cabin comfort, Delta 23-198 and 23-199 feature spacious interiors with a focus on passenger experience. Larger windows and improved cabin pressure systems create a more pleasant atmosphere, reducing fatigue during long flights. The aircraft's seating layout has been optimized to maximize comfort, with options for various classes to cater to different passenger needs.

Technologically, these models incorporate advanced avionics systems that enhance navigation and safety. The flight deck is equipped with state-of-the-art displays and automated systems that aid pilots in decision-making and improve overall situational awareness. Additionally, real-time data analytics tools are integrated into the aircraft’s operations, allowing for predictive maintenance and operational optimization.

Both aircraft are designed with sustainability in mind. They meet stringent environmental regulations and are equipped with systems that minimize noise pollution and emissions. This commitment to greener aviation technology positions Delta 23-198 and 23-199 as responsible choices for airlines looking to reduce their carbon footprint.

In summary, Delta 23-198 and 23-199 exemplify the future of aviation with their combination of efficiency, comfort, and advanced technology. Their ability to meet the evolving demands of the aviation industry while prioritizing sustainability makes them significant players in the aircraft market. Airlines looking to enhance their fleet will find that these models offer a compelling mix of performance and passenger satisfaction.