Harbor Freight Tools 95668 See Figure P, Fence Alignment, 57, 59. See Figure Q

Page 14

shaping tasks. The Fences (60) can be set at different positions to remove material from the entire edge of the wood stock or set at the same position to shape part of the edge.

2.Loosen the Lock Handle (61). (See Figure P.)

3.Adjust the position of the Fence (60) by turning the Knob (64). (See Figure P.)

4.Once the Fence (60) is in the desired position, re-tighten the Lock Handle (61).

(See Figure P.)

FIGURE P	FENCE
FENCE	(60)
FENCE
(60)

LOCK HANDLE

(61)

KNOB

(64)

Fence Alignment:

1.To align the Fences (60) so they are parallel with each other, use a straight edge that is long enough to span the entire length of the two Fences (60). (See

Figure Q.)

2.If the Fences (60) are not parallel, place shims (not included) between the back of the Fence and the face of the Right or Left Fence Body

(57, 59). (See Figure Q.)

FENCE (60)

FENCE

(60)

STRAIGHT EDGE (NOT INCLUDED)

	FIGURE Q
SKU 95668	For technical questions, please call 1-800-444-3353	PAGE 14

Image 14

Contents For technical questions or replacement parts, please call Industrial SHAPER/ROUTERSave this Manual Product SpecificationsGeneral Safety Rules Work AreaElectrical Safety Tool USE and Care Specific Safety Rules ServicePage Grounding See Outlets for 2-Prong Plug See 3-Prong Plug and OutletProng Plug and Outlet Outlets for 2-Prong Plug Unpacking Assembly InstructionsStand Assembly See Figure FOptional Table Spacer Installation See Figure GInstalling The Spindle Installing The FencesInstalling The Safety Guard 57, 59. See Figure HHex Nut. See Figure M Figure JSee Figures K, L, and M Adjustments InstructionsRouter Bit Assembly See Figure O57, 59. See Figure Q See Figure PFence Alignment See Figure R Belt AdjustmentTable Inserts Screws. See Figure SSee Figure T Cutter InstallationCutter Direction Setting Spindle Height See Figure Y, nextRub Collars See Figure AAOperating Instructions Cutter. See Figure CCTo Set Up The Wooden Fences For Straight Shaping Start UpSee Figure DD Figure DDTo Set Up The Aluminum Fences For Partial Edge Removal Freehand ShapingSee Figures HH Figure HHPattern Shaping See Figure JJINSPECTION, MAINTENANCE, and Cleaning Please Read the Following CarefullyTroubleshooting Problem Possible Reason Possible SolutionParts List DescriptionWiring Diagram MotorAssembly Diagram Limited 1 year / 90 Day warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800