Compatible Systems 1220I manual What You Will Need To Get Started, Supplied with the MicroRouter

6 Chapter 2 - Getting Started

What You Will Need To Get Started

Before connecting the MicroRouter 1220i, please check the list below to make sure that you have received all of the items that are supplied with the MicroRouter 1220i package.

You should also make sure you have any additional items that are necessary to connect the router to your network.

Supplied with the MicroRouter 1220i

Please check your shipping package for the following items:

•MicroRouter 1220i unit

•Wall-mount power supply

•One DB-25 to DB-25 data and auxiliary interface cable

•CD-ROM including:

CompatiView software

Operating software

"HTML versions of product documentation (which can be viewed with your favorite web browser)

•CompatiView Management Software Reference Guide

•Text-Based Configuration and Command Line Management Refer- ence Guide

•Warranty registration card

Needed For Installation

Before connecting the MicroRouter 1220i to your network, you need to make sure that you have the necessary equipment for connecting to the local Ethernets and the wide area transmission device(s) (modem, 56K CSU/DSU, ISDN terminal adapter, T1 CSU/DSU).

Ethernet Connection Requirements

The MicroRouter 1220i’s Ethernet interfaces directly support 10BaseT twisted-pair Ethernet. Other Ethernet cabling types (such as thin Ethernet, thick Ethernet, fiber optic cabling or pre-10BaseT twisted-pair) can be supported using a 10BaseT mini-hub or other conversion device.