Compatible Systems 1220I manual Appendix D Downloading Software From Compatible Systems

Page 41

Appendix D - Downloading Software From Compatible Systems

35

Appendix D - Downloading

Software From Compatible

Systems

We make the latest versions of operating software for all Compatible Systems products available at our Web site. The latest version of CompatiView management software is also available.

To download software, follow the instructions below.

1.Use your browser to access http://www.compatible.com/, and find the link on our home page to “Software Downloads.”

2.Select the product and software version you want, and click on the appropriate file to download it.

Note: Uncompressed downloads (suitable for TFTP and Compa- vtiView Windows downloading) are stored as .DLD files. Self-extracting Windows compatible style files (and CompatiView for Windows itself) are stored as .EXE files. Self-extracting Macintosh style files are stored as .sea.bin (MacBinary format) and/or .sea.hqx files.

Note: These files are also accessible directly via Anonymous FTP at vftp.compatible.com/files/.

Image 41 Contents
MicroRouter Installation Guide Page Getting Started Network InstallationIntroduction CompatiView Software Installation Basic Configuration GuideAppendix B Connector and Cable Pin Outs Appendix a Shipping DefaultsSystems Appendix E Terms and Conditions Introduction IntroductionAbout the MicroRouter Getting Started MicroRouter 1220i Installation OverviewCompatiView Software Installation Introduction Network InstallationCommand Line Preparation Basic Configuration GuidePage Getting Started Warranty and ServiceFew Notes Please Read The ManualsWhat You Will Need To Get Started Needed For InstallationSupplied with the MicroRouter Ethernet Connection RequirementsInterface Telco Line Connection RequirementsGetting Started 10Base-T Twisted-Pair Ethernet RS-232 Interface Placing the Router Network InstallationConnecting a Line Device to MicroRouter Connecting the Router to the EthernetConnecting to Twisted-Pair Ethernet Connecting Devices to the V.35 InterfaceConnecting Devices to the RS-232C Interface Connecting an Out-of-Band Management ConsolePowering Up the Router System Requirements Installation and OperationCompatiView for Windows Transport Protocols and CompatiView Out-of-Band Command Line Management Command Line ManagementCommand Line Management Setting Up Telnet OperationCommand Line Management Page Basic Configuration Guide IP Protocol Ethernet Interface ConfigurationRequired for IP Suggested for IPPhysical Communications Settings WAN Interface ConfigurationIPX Protocol Required for IPXRequired for Dedicated/Leased Line Operation Link ConfigurationSuggested for Dedicated/Leased Line Operation Required for Dial-On-Demand OperationIP Protocol Frame Relay Dlci Mappings Frame Relay ConfigurationRequired for IP Unnumbered Interface Required for IP Numbered InterfaceIPX Protocol Smds Addressing Saving a Configuration File to Flash ROMPage WAN Interfaces Appendix a Shipping DefaultsEthernet Interfaces RS-232 WAN 1 Link & Physical Defaults WAN 0 Link & Physical DefaultsPin Outs for V.35 Female Connector DTE Appendix B Connector and Cable Pin OutsAppendix B Connector and Cable Pin Outs Ethernet Traffic Indicators Ethernet LED Bars Power On, No TrafficOther Indicators on All LED Bars Panic IndicatorsAppendix C LED Patterns and Test Switch Settings MicroRouter 1220i Switch SettingsAppendix D Downloading Software From Compatible Systems Page Appendix E Terms and Conditions Appendix E Terms ConditionsAppendix E Terms and Conditions Appendix E Terms and Conditions