English
14. Never attempt to saw with the circular saw held upside down in a vise. This is extremely dangerous and can lead to serious accidents. (Fig. 7)
Fig. 7
15.Never touch moving parts.
Never place your hands, fingers or other body parts near the tool’s moving parts.
16.Never operate without all guards in place.
Never operate this tool without all guards or safety features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety feature, be sure to replace the guard or safety feature before resuming operation of the tool.
17.Use right tool.
Don’t force small tool or attachment to do the job of a
Don’t use tool for purpose not intended
18.Never use a power tool for applications other than those specified.
Never use a power tool for applications other than those specified in the Instruction Manual.
19.Handle tool correctly.
Operate the tool according to the instructions provided herein. Do not drop or throw the tool. Never allow the tool to be operated by children, individuals unfamiliar with its operation or unauthorized personnel.
20.Definitions for symbols
V | volts |
|
— |
| direct current |
no | no load speed | |
revolutions or reciprocation per minute | ||
21.Keep all screws, bolts and covers tightly in place.
Keep all screws, bolts, and plates tightly mounted. Check their condition periodically.
22.Do not use power tools if the plastic housing or handle is cracked.
Cracks in the tool’s housing or handle can lead to electric shock. Such tools should not be used until repaired.
23.Blades and accessories must be securely mounted to the tool.
Prevent potential injuries to youself or others. Blades, cutting implements and accesso- ries which have been mounted to the tool should be secure and tight.
24.Never use a tool which is defective or operating abnormally.
If the tool appears to be operating unusually, making strange noises, or otherwise appears defective, stop using it immediately and arrange for repairs by a Hitachi authorized service center.
9