Black & Decker SSL20SBR, SSL16 (16V MAX*) instruction manual Specific Safety Rules

Page 3

 

e) Do not overreach. Keep proper footing and balance at all times. This enables

 

better control of the power tool in unexpected situations.

 

f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing

 

and gloves away from moving parts. Loose clothes, jewelry or long hair can be

 

caught in moving parts.

 

g) If devices are provided for the connection of dust extraction and collection

 

facilities, ensure these are connected and properly used. Use of dust collection

 

can reduce dust-related hazards.

4) Power tool use and care

 

a) Do not force the power tool. Use the correct power tool for your application. The

 

correct power tool will do the job better and safer at the rate for which it was designed.

 

b) Do not use the power tool if the switch does not turn it on and off. Any power

 

tool that cannot be controlled with the switch is dangerous and must be repaired.

 

c) Disconnect the plug from the power source and/or the battery pack from the

 

power tool before making any adjustments, changing accessories, or storing

 

power tools. Such preventive safety measures reduce the risk of starting the power

 

tool accidentally.

 

d) Store idle power tools out of the reach of children and do not allow persons

 

unfamiliar with the power tool or these instructions to operate the power tool.

 

Power tools are dangerous in the hands of untrained users.

 

e) Maintain power tools. Check for misalignment or binding of moving parts,

 

breakage of parts and any other condition that may affect the power tool’s

 

operation. If damaged, have the power tool repaired before use. Many

 

accidents are caused by poorly maintained power tools.

 

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp

 

cutting edges are less likely to bind and are easier to control.

 

g) Use the power tool, accessories and tool bits, etc. in accordance with these

 

instructions, taking into account the working conditions and the work to be

 

performed. Use of the power tool for operations different from those intended could

 

result in a hazardous situation.

5) Battery tool use and care

 

a) Recharge only with the charger specified by the manufacturer. A charger that

 

is suitable for one type of battery pack may create a risk of fire when used with

 

another battery pack.

 

b) Use power tools only with specifically designated battery packs. Use of any

 

other battery packs may create a risk of injury and fire.

 

c) When battery pack is not in use, keep it away from other metal objects like

 

paper clips, coins, keys, nails, screws, or other small metal objects that can

 

make a connection from one terminal to another. Shorting the battery terminals

 

together may cause burns or a fire.

 

d) Under abusive conditions, liquid may be ejected from the battery, avoid

 

contact. If contact accidentally occurs, flush with water. If liquid contacts

 

eyes, additionally seek medical help. Liquid ejected from the battery may cause

 

irritation or burns.

6) Service

 

a) Have your power tool serviced by a qualified repair person using only identical

 

replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

•

Hold power tool by insulated gripping surfaces, when performing an operation where the

 

cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may

•

make exposed metal parts of the power tool “live” and could give the operator an electric shock.

Use auxiliary handle(s) if supplied with the tool. Loss of control can cause personal

•

injury.

Use clamps or another practical way to secure and support the work piece to a stable

 

platform. Holding the work by hand or against your body leaves it unstable and may lead to

•

loss of control.

When not in use, place tool on its side on a stable surface where it will not cause a

 

tripping or falling hazard. Some tools with large battery packs will stand upright but may be

•

easily knocked over.

Keep your hair, clothing, and gloves away from air vents. Air vents often cover

•

moving parts in which these items can be caught.

Hold tool firmly with two hands, one hand on the handle, and the other gripping the bottom

around the battery area. Use auxiliary handle if provided. Loss of control can cause personal injury.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 16V* MAX & 20V max** Cordless drills Work Area Safety Safety Guidelines DefinitionsSpecific Safety Rules Important Safety Instructions for Battery Chargers FUNCTIONAL DESCRIPTION SSL16 SSL20Long storage will not harm the battery pack or charger Black & Decker chargers are designed to chargeMay be used at this time or left on the charger Important Charging Notes Installing and Removing Battery Pack From the ToolTorque Control smart select technology Figure E Trigger Switch & Reversing Button Figure DDrilling Make sure switch turns drill on and offScrew Driving On board bit storage Figure GTroubleshooting See ‘Tools Electric’ Yellow Pages For Service Sales Service Information Full Two-Year Home Use WarrantyPerceuse Sans FIL DE 16V MAX*, 20V MAX Lignes directrices en matière de sécurité définitions Réparation · le plomb dans les peintures à base de plomb Règles de sécurité spécifiquesDescription Fonctionnelle 25 pi Calibre de fil minimum recommandé pour les rallongesLire toutes les directives Longueur totale de la rallongeSi le bloc-piles ne se charge pas adéquatement, on doit Peut être utilisé à ce moment-ci ou laissé sur le chargeurInsertion et retrait du bloc-piles de l’outil Avertissement de sécurité et directives perceusesDétente ET Bouton Inverseur Figure D Directives D’UTILISATIONPerçage VissageRangement intégré des mèches Figure G Maximiser la durée de vie du AccessoiresProblème Dépannage Solution possible Cause possible Sceau RbrcmcAccessoires Taladro Inalámbrico DE 16V MÁX*, 20V MÁX Seguridad eléctrica Pautas DE SEGURIDAD/DEFINICIONESNormas de seguridad específicas Símbolos Daños personales y materiales Descripción DE LAS FuncionesDe la cubierta Lea todas las instruccionesLongitud total del cable PiesBlack & Decker en 3 a 4 horas según el paquete que se carga Recomendaciones con respecto al almacenamientoPara instalar el paquete de Inferior del paquete de bateríasSuelte el disparador inmediatamente y Encenderla nuevamenteInstrucciones DE Operación Las piezas de trabajo de material blandoTorsión o velocidad recomendada para esa aplicación Tocino funciona también DestornilladoPor encima del paquete de baterías TaladradoEl sello Rbrc Asegúrese que el interruptor enciende y apaga el taladroAccesorios Solamente para Propósitos de México Maximizar la vida útil delPara que se cargue Paquete de baterías, estePage Años DE Garantia Telephone · No. TeléfonoPage Page Perfiles y Herramientas de Morelia Htas. Portátiles de ChihuahuaFerre Pat de Puebla, S.A. de C.V Fernando González Armenta
Related manuals
Manual 21 pages 42.56 Kb

SSL16 (16V MAX*), SSL20SBR, SSL20, SSL16 specifications

The Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) series represent a significant innovation in the realm of cordless tools and outdoor equipment, particularly in the domain of battery-powered lawn and garden maintenance. These models showcase a seamless blend of advanced technology, user-friendly design, and robust performance, catering to both homeowners and professionals alike.

The SSL16 model is powered by a 16V MAX lithium-ion battery, which provides reliable and consistent power for a range of applications. This ensures that users experience minimal downtime, as the battery is engineered for longer runtime and quicker charging than traditional batteries. Its lightweight design enhances maneuverability, making it an excellent option for trimming and shaping hedges or small bushes.

Moving to the SSL20 and SSL20SBR, both models elevate the performance with an enhanced 20V MAX lithium-ion battery. This increased power translates to greater efficiency and the ability to tackle larger, more demanding tasks with ease. The SSL20SBR model features a brushless motor, reducing wear and tear while delivering superior performance. Brushless technology not only extends the tool’s lifespan but also maximizes runtime and efficiency, offering users a powerful cutting experience while minimizing maintenance needs.

One standout feature across the series is the ergonomic design, including soft-grip handles that reduce user fatigue during prolonged use, making these tools comfortable to operate. The tools also come equipped with an adjustable cutting width, enabling users to adapt their approach to different gardening tasks. This feature allows for precise trimming, ensuring that users can achieve the desired look for their lawns and gardens.

The Black & Decker SSL series also emphasizes user safety with integrated safety features, including a safety lock to prevent accidental starts. Coupled with a lightweight design, these tools ensure that users can maintain control and comfort, even in challenging working conditions.

In summary, the Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) models showcase a remarkable fusion of power, versatility, and usability. From their advanced battery technologies to user-oriented features, these tools stand out in the market, offering gardeners and landscapers the reliability and efficiency they need to achieve professional results. Whether tackling small projects or larger landscaping endeavors, these models are built to perform, making them an excellent addition to any tool collection.
Top Page Image Contents