Black & Decker SSL16, SSL20SBR Screw Driving, On board bit storage Figure G, Drilling

Page 9

Keyless Chuck (Figure F)

 

 

WARNING: Make certain the lock-off

 

 

F

 

button is engaged to prevent switch

 

actuation before installing or removing

 

 

accessories.

 

 

To insert a drill bit or other accessory:

 

 

1. Grasp the rear half of the chuck (4)

 

 

with one hand and use your other

4a

4

hand to rotate the front half (4a) in the

counterclockwise direction, as viewed

 

 

from the chuck end.

 

 

2. Insert the bit or other accessory fully into

 

 

the chuck, and tighten securely by holding

 

 

the rear half of the chuck and rotating the

 

 

front portion in the clockwise direction as

 

 

viewed from the chuck end.

 

 

 

 

WARNING: Do not attempt to tighten drill bits (or any other accessory) by gripping the

front part of the chuck and turning the tool on. Damage to the chuck and personal injury

may occur when changing accessories.

 

 

Screw Driving

 

For driving fasteners, the reversing button should be pushed to the left. Use reverse

(button pushed to the right) for removing fasteners. When moving from forward to reverse,

or vice versa, always release the trigger switch first.

 

on board bit storage (Figure G)

 

A bit storage slot (8) is built-in to the area just above the battery

G

pack.

Drilling

8

 

• Use sharp drill bits only.

 

 

 

 

• Support and secure work properly, as instructed in the Safety Instructions.

• Use appropriate and required safety equipment, as instructed in the Safety Instructions.

• Secure and maintain work area, as instructed in the Safety Instructions.

 

• Run the drill very slowly, using light pressure, until the hole is started enough to keep the

drill bit from slipping out of it.

 

• Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting

but not so much as to stall the motor or deflect the bit.

 

• Hold the drill firmly with two hands to control its twisting action.

 

• DO NOT CLICK THE TRIGGER OF A STALLED DRILL OFF AND ON IN AN ATTEMPT TO START IT. DAMAGE TO THE DRILL CAN RESULT.

• Minimize stalling on breakthrough by reducing pressure and slowly drilling through the last part of the hole.

• Keep the motor running while pulling the bit out of a drilled hole. This will help reduce jamming.

• Make sure switch turns drill on and off.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 16V* MAX & 20V max** Cordless drills Work Area Safety Safety Guidelines DefinitionsSpecific Safety Rules Important Safety Instructions for Battery Chargers FUNCTIONAL DESCRIPTION SSL16 SSL20Long storage will not harm the battery pack or charger Black & Decker chargers are designed to chargeMay be used at this time or left on the charger Important Charging Notes Installing and Removing Battery Pack From the ToolTorque Control smart select technology Figure E Trigger Switch & Reversing Button Figure DScrew Driving Make sure switch turns drill on and offOn board bit storage Figure G DrillingTroubleshooting See ‘Tools Electric’ Yellow Pages For Service Sales Service Information Full Two-Year Home Use WarrantyPerceuse Sans FIL DE 16V MAX*, 20V MAX Lignes directrices en matière de sécurité définitions Réparation · le plomb dans les peintures à base de plomb Règles de sécurité spécifiquesDescription Fonctionnelle Lire toutes les directives Calibre de fil minimum recommandé pour les rallongesLongueur totale de la rallonge 25 piSi le bloc-piles ne se charge pas adéquatement, on doit Peut être utilisé à ce moment-ci ou laissé sur le chargeurInsertion et retrait du bloc-piles de l’outil Avertissement de sécurité et directives perceusesDétente ET Bouton Inverseur Figure D Directives D’UTILISATIONPerçage VissageRangement intégré des mèches Figure G Problème Dépannage Solution possible Cause possible AccessoiresSceau Rbrcmc Maximiser la durée de vie duAccessoires Taladro Inalámbrico DE 16V MÁX*, 20V MÁX Seguridad eléctrica Pautas DE SEGURIDAD/DEFINICIONESNormas de seguridad específicas Símbolos Daños personales y materiales Descripción DE LAS FuncionesLongitud total del cable Lea todas las instruccionesPies De la cubiertaBlack & Decker en 3 a 4 horas según el paquete que se carga Recomendaciones con respecto al almacenamientoSuelte el disparador inmediatamente y Inferior del paquete de bateríasEncenderla nuevamente Para instalar el paquete deInstrucciones DE Operación Las piezas de trabajo de material blandoTorsión o velocidad recomendada para esa aplicación Por encima del paquete de baterías DestornilladoTaladrado Tocino funciona tambiénEl sello Rbrc Asegúrese que el interruptor enciende y apaga el taladroAccesorios Para que se cargue Maximizar la vida útil delPaquete de baterías, este Solamente para Propósitos de MéxicoPage Años DE Garantia Telephone · No. TeléfonoPage Page Ferre Pat de Puebla, S.A. de C.V Htas. Portátiles de ChihuahuaFernando González Armenta Perfiles y Herramientas de Morelia
Related manuals
Manual 21 pages 42.56 Kb

SSL16 (16V MAX*), SSL20SBR, SSL20, SSL16 specifications

The Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) series represent a significant innovation in the realm of cordless tools and outdoor equipment, particularly in the domain of battery-powered lawn and garden maintenance. These models showcase a seamless blend of advanced technology, user-friendly design, and robust performance, catering to both homeowners and professionals alike.

The SSL16 model is powered by a 16V MAX lithium-ion battery, which provides reliable and consistent power for a range of applications. This ensures that users experience minimal downtime, as the battery is engineered for longer runtime and quicker charging than traditional batteries. Its lightweight design enhances maneuverability, making it an excellent option for trimming and shaping hedges or small bushes.

Moving to the SSL20 and SSL20SBR, both models elevate the performance with an enhanced 20V MAX lithium-ion battery. This increased power translates to greater efficiency and the ability to tackle larger, more demanding tasks with ease. The SSL20SBR model features a brushless motor, reducing wear and tear while delivering superior performance. Brushless technology not only extends the tool’s lifespan but also maximizes runtime and efficiency, offering users a powerful cutting experience while minimizing maintenance needs.

One standout feature across the series is the ergonomic design, including soft-grip handles that reduce user fatigue during prolonged use, making these tools comfortable to operate. The tools also come equipped with an adjustable cutting width, enabling users to adapt their approach to different gardening tasks. This feature allows for precise trimming, ensuring that users can achieve the desired look for their lawns and gardens.

The Black & Decker SSL series also emphasizes user safety with integrated safety features, including a safety lock to prevent accidental starts. Coupled with a lightweight design, these tools ensure that users can maintain control and comfort, even in challenging working conditions.

In summary, the Black & Decker SSL16, SSL20, SSL20SBR, and SSL16 (16V MAX*) models showcase a remarkable fusion of power, versatility, and usability. From their advanced battery technologies to user-oriented features, these tools stand out in the market, offering gardeners and landscapers the reliability and efficiency they need to achieve professional results. Whether tackling small projects or larger landscaping endeavors, these models are built to perform, making them an excellent addition to any tool collection.
Top Page Image Contents