Honeywell WT6500 Safety Icons, Important Safety Instructions, General Safety Instructions

Page 2

II

Safety Instructions

 

 

 

 

Safety Instructions

PLEASE READ THESE INSTRUCTIONS AND THE ENTIRE MANUAL PRIOR TO INSTALLATION.

Safety Icons

The following symbols identify dangers associated with the installation, use or ownership of the SMARTBOX™ Controller. When you see these symbols, please be aware of the potential for personal injury or property damage.

WARNING indicates a hazard that could result in death, personal injury or property damage.

CAUTION indicates a hazard that could result in property damage.

IMPORTANT: PLEASE TAKE NOTE

PROFESSIONAL INSTALLATION: REQUIRED

TIP: Helpful information to ease the installation

Important Safety Instructions

This manual contains important safety instructions that should be followed during the installation and maintenance of this product. Be sure to read, understand and save these safety instructions.

General Safety Instructions

All electrical work must be done in accordance with all applicable local, national, and/or international electrical codes.

Before installing or using this device, read all instructions and cautionary

markings located in (or on) this guide, the unit, the batteries, turbine and any other equipment used.

This product is designed for indoor mounting only. Do not expose this unit to rain, snow or liquids of any type.

To reduce the chance of short-circuits, use insulated tools when installing or working with the unit or any DC source (such as PV, hydro, wind, or batteries).

Remove all jewelry when installing or working with the unit or any DC source. This will greatly reduce the chance of accidental exposure to live circuits.

The unit contains more than one live circuit (batteries and turbine). Power may be present at more than one source.

This product contains no user-serviceable parts.

SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14

Image 2
Contents Smartbox Controller Important Safety Instructions Safety InstructionsSafety Icons General Safety InstructionsBattery Safety Information Limitations on USESafety Instructions Safety Instructions Table of Contents Commisioning Introduction For Information On SeeParts Inspection Smartbox ControllerMajor System Components Not to be used Battery OverviewBattery Types Minimum to be usedAmp-hour Ratings Battery SelectionAC Load Detail and Selection Recommended Appliances Not RecommendedIntroduction Installation Smartbox ControllerSystem Diagrams Turbine Block DiagramRisk of Fire or Explosion Smartbox Controller DiagramMounting EXPLOSION/CORROSION Damage Minimum Clearance for Proper MountingEquipment Damage Shock Hazard WiringGrounding Shock Hazard and Fire HazardWiring Diagram Turbine toTurbine Wiring and Distances Turbine Current Rating and WiringTurbine Over-current Protection Reverse Polarity DamageBattery Wiring Battery Connection LocationBattery Over-current Protection Shock or Fire HazardAC Input Wiring AC Output WiringTurbine Smartbox Controller AC Output Over-current ProtectionControl Wiring Junction BOXEnclosure Internal Wiring Battery SetupConnecting the Smartbox Controller Battery Setup ChartFire and Shock Hazard Warranty Void WarningTo connect the Smartbox Controller Smartbox Installation Commissioning For Information on See Commissioning ProcessCheck all connections for polarity Set the battery type FloodedCommissioning Process Display DescriptionShows if a turbine voltage was found Press Enter to start the turbineCommissioning Operation Starting/Stopping Turbine IntroductionTurbine Operating States Viewing Operating StatusController Energy Consumption States Turbine Operating StatesCool Down System ProtectionTurbine User Stop State Over Wind SpeedFault Description State Required for Fault System FaultsNon Grid-Tie SmartBox Fault Specifications System Menu and Navigation Smartbox Controller Front PanelNavigation Buttons Operations MenuTechnician Menu View Data Menu Battery Setup Menu Operation Specifications Charge Non Grid-Tie Smart Box Electrical SpecificationsInput EnvironmentWindTronics
Related manuals
Manual 46 pages 4.52 Kb