Honeywell WT6500 owner manual Minimum Clearance for Proper Mounting, Equipment Damage

SMARTBOX Installation 10

Minimum Clearance for Proper Mounting

allow for at least 150 mm (6 in) clearance.

allow for at least	allow for at least	allow for at least
300 mm (12 in)	300 mm (12 in)	508 mm (20 in)
clearance.	clearance.	clearance.

allow for at least 150 mm (6 in) clearance.

Figure 2.3 Minimum Clearance for Proper Mounting

EQUIPMENT DAMAGE

Never install the SMARTBOX™ Controller where it is exposed to salt water spray. Exposure to salt water will void the warranty and may cause a shock hazard.

EXPLOSION/CORROSION DAMAGE

To reduce the risk of corrosion from hydrogen-sulfide gas vented by batteries, do not install the SMARTBOX™ Controller in sealed compartments containing batteries. Failure to follow this warning may result in death, personal injury or property damage.

SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14