Honeywell WT6500 Non Grid-Tie Smart Box Electrical Specifications, Input, Charge, Environment

Specifications 38

Non Grid-Tie Smart Box Electrical Specifications

Description	Rating	Units
Input
Maximum Turbine Voltage	200	Volts DC
Operating input voltage range	30-170	Volts DC
Maximum input current	18	Amps DC
Maximum input short circuit current	20	Amps DC
Inverter
Operating voltage range	120VAC+/-3%	Volts AC
Operating frequency range or single frequency	60Hz+/-0.05%	Hz
Nominal output voltage (ac)	120	Volts AC
Nominal output frequency	60	Hz
Maximum continuous output current	12.5	Amps AC
Maximum continuous output power (ac)	1500	VA
Maximum output fault current (ac) for 3 minutes	14.5A / 3 min	Amps AC
Maximum output overcurrent protection (ac)	20	Amps AC
Charge
Nominal output voltage (dc)	24	Volts DC
Charger output voltage operation range (dc)	12-30	Volts DC
Maximum continuous output current (dc)	60	Amps DC
Maximum continuous output power (dc)	1500	Watts DC
Maximum output current (dc)	60	Amps DC
Maximum output fault current (dc)	62	Amps DC

Environment

60

Hz +/- 0.05%

Normal operation temperature range	0 - 40	Deg C
Storage temperature range	-30 - 70	Deg C
Other
GFI Trip	0.5	Amps
Operating Power	<3.5	Watts
Output Waveform	Pure Sine	THD > 3%
Inverter Efficiency	94.00%
Changer Efficiency	>90%
Charger regulation method	Three Stage: bulk, absorption, float

Manufacturer reserves the right, without notice or liability, to change design and specifications at any time.

DATA SUBJECT TO CHANGE WITHOUT NOTICE

SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14