HP 2103R-CSDI manual Mini-DIN connector pinouts are provided in Appendix a

Configuring the Edge Router Engine 3-11

Console and auxiliary port specifications are provided in Table 3-2 and

Table 3-3, respectively.

Table 3-2 Console Port Information

		Transmission
Interface	Connector	Type	Protocol
RS-232	8-pin mini-DIN	DTE	Asynchronous, 9600, 8-bit data,
			1 stop bit, no parity, XON/XOFF
Table 3-3 Auxiliary Port Information
		Transmission
Interface	Connector	Type	Protocol
RS-232	8-pin mini-DIN	DTE	Asynchronous or synchronous, 9600,
			8-bit data, 1 stop bit, no parity,
			XON/XOFF

Mini-DIN connector pinouts are provided in Appendix A.

The Edge Router module is shipped autoconfigured for connection to a network running NetWare®. If you are not connected to a NetWare network, you may see the following message:

The IPXNetwork for LocalPath ms_ethernet couldn’t be

learned.

Ignore this message and continue with the appropriate configuration.

Using the Terminal Edge Router engine documentation is included on the Cisco Systems to Configure the CD-ROM that is shipped with the Edge Router module.

Edge Router Engine

Refer to the Cisco Router Products Configuration and Reference Guide for information on configuring parameters for the Edge Router module.