Unpacking | To unpack the Edge Router module: |
Procedures |
|
1Verify that the module is the model you ordered by checking the model number listed on the side of the shipping carton.
Note that the product model number printed on the shipping box differs from the model number on the product. The model number on the shipping box contains the prefix 3C9.
2Remove the module, in its antistatic shielding bag, from the shipping carton.
3When you unpack the Edge Router module, you should:
■Use a foot strap and grounded mat, or wear a grounded static discharge wrist strap.
■Touch a grounded source just before you remove the Edge Router module from the carton.
CAUTION: To avoid damaging the Edge Router module with ESD, use proper grounding techniques.
Remove the module from the antistatic bag and inspect it for damage.
Always handle modules by the faceplate, being careful not to touch the components. If the module appears to be damaged, return it to the antistatic shielding bag, repack it in the shipping carton, and contact your local supplier.
4Verify that the contents of the shipment are complete. The shipment contents are as follows:
■Edge Router module
■
■Edge Router Module Installation Guide for Ethernet
■Release Notes for the Edge Router module
5Store the shipping cartons and antistatic wrapping so that you can repackage the product for storage or shipment.