HP Application Software Suite for Microsoft Hyper-V manual Configuring RMH Server, Add-HyperV

Table 19 Logout-Rmhparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-Remove	Optional	If specified, RMH user along with
		Hyper-V host/cluster and Storage
		System credentials will be removed from
		RMH credentials repository.

Configuring RMH Server

The section describes the command line usage and parameters for configuring Hyper-V servers.

Add-HyperV

Add-HyperVadds Hyper-V credentials for users. The command is used with each Microsoft Hyper-V (cluster or standalone host) credentials and managed by the application.

Preconditions

•User must first log on with Login-Rmh

•Hyper-V name (or synonym) just not already exist

Syntax

Any optional parameters require square brackets [ ] around them.

Add-HyperV -RmhServerName <RmhServerName> -HypervName <HypervName>

-HypervUsername <HypervUser> -HypervPassword <HypervPassword> [-Verbose]

Table 20 Add-HyperVparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Hyper V host or cluster name. This is
		FQDN or IP address. Synonyms are
		checked. The localhost is not supported.
-HypervUsername	Required	Hyper-V username. If cluster, ensure all
		controller nodes in the cluster have the
		same username. If not specified, a
		dialog box will be presented to enter
		credentials.
-HypervPassword	Required	Hyper-V password. If cluster, ensure all
		controller nodes in the cluster have the
		same password. If not specified, a
		dialog box will be presented to enter
		credentials.
-Verbose	Optional	Displays progress messages.

Configuring RMH Server 45