HP Application Software Suite for Microsoft Hyper-V manual Restore-vCopyVm

Table 51 Restore-vCopyVMparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Optional	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNameUuid	Required	Select VC by name/uuid.
-VmNameUuid	Required	Select name/uuid to filter VC selection
		by VM.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Force	Optional	Bypass confirmation prompt.
-RestartVm	Optional	If specified, VM will be restarted.
-Verbose	Optional	Displays progress messages.

Result with Description

This command returns the location of restored Virtual Machine and host name.

Success Paths

•Scenario 1: VM(s) successfully restores. Specified VM(s) are successfully restored.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Storage System session credentials are not provided. Storage System session credentials are not provided for this command.

•Scenario 3: License missing for RMH. License is missing for RMH.

•Scenario 4: Original mount points do not exist.

The original mount points for VM system files and all VHDs must exist.

•Scenario 5: Fails to mount Virtual Volumes to Hyper-V host. Unable to mount Virtual Volumes to Hyper-V host for restore.

•Scenario 6: Fails to unmount Virtual Volumes from Hyper-V host. After restore is complete, unmount is unable to complete.

•Scenario 7: Only one Virtual Copy may be restored at a time.

Filtering of Virtual Copies using -VcNameUuid/-VmNameUuiddoes not result in only one Virtual Copy to restore.

Restore-vCopyVm 81