HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual Remove-vCopy, Post Conditions

Success Paths

•Scenario 1: Remove Storage System is successful. Remove operation is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Not previously added.

Storage System specified is not previously added.

Remove-vCopy

Remove-vCopyremoves a Virtual Copy.

Preconditions

The user must first login with Login-Rmh.

Post Conditions

•Virtual Copy removed and all available Virtual Volumes deleted, or

•Virtual Copy retained due to at least one Virtual Volume failing to delete with reason other than not found on storage system.

Syntax

Any optional parameters require square brackets [ ] around them.

Remove-vCopy -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid <VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Force] [-Verbose]

Table 50 Remove-vCopyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Optional	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNameUuid	Required	Select VC by name/uuid.
-VmNameUuid	Required	Select name/uuid to filter VC selection
		by VM.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Force	Optional	Bypass confirmation prompt.
-Verbose	Optional	Displays progress messages.

Remove-vCopy 79