HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual Get-vCopyparameters

•Scenario 3: VM name/uuid specified is invalid

VM name or uuid must be valid to fetch RMH Policy.

•Scenario 4: RMH Policy does not exist. RMH Policy does not exist for specified VM.

Get-vCopy

Get-vCopyis used to retrieve existing Virtual Copies details of a Virtual Machine from the Recovery Manager Hyper-V Repository of a specified Hyper-V server. This command has many filters to reduce the number of Virtual Copies during retrieving process.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Get-vCopy -RmhServerName <RmhServerName> -HypervName <HypervName> [-VcNamesUuids] [-VmNamesUuids] [-Timestamp] [-Verbose]

Table 42 Get-vCopyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNamesUuids	Optional	Select VCs by name/uuid using a
		comma-separated list. If not specified,
		VCs name/uuid is not used to filter
		selection.
-VmNamesUuids	Optional	Select names/uuids to filter VC selection
		by VM. If not specified, VM
		names/uuids is not used to filter
		selection.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Verbose	Optional	Displays progress messages.

70 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands