HP StoreServ Application Suite for Microsoft Hyper-V Media manual Get-ClusterNodeNames

Table 22 Set-RmhPolicyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VmNameUuid	Required	Name/unique id of VM to set policy
		for Virtual Machine.
-Expiry	Optional	Integer value followed by letter h or d
		for Hours and Days respectively. Use 0
		to reset.
-Retention	Optional	Integer value followed by letter h or d
		for Hours and Days respectively. Use 0
		to reset
-SavedStateBackups	Optional	Disabled or enabled. Use reset to
		reset.
-Verbose	Optional	Displays progress messages

Get-ClusterNodeNames

The Get-ClusterNodeNamescommand retrieves cluster node names for the Hyper-V cluster.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Get-ClusterNodeNames -RmhServerName <RmhServerName> -HypervName <HypervName> [-Verbose]

Table 23 Get-ClusterNodeNames parameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-Verbose	Optional	Displays progress messages.

Get-EncryptedLoginCredentials

Get-EncryptedLoginCredentialsis used for scripting to return an encrypted password for the currently logged-in RMH user.

Configuring RMH Server 47