HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual Logout-Rmhparameters

Success Paths

•Scenario 1: Login is successful.

Login to a specified Hyper-V host is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Cannot communicate with host.

RMH Server cannot communicate with a specified Hyper-V host.

•Scenario 3: Login failure on Hyper-V host.

RMH Server cannot authenticate with the specified Hyper-V host.

•Scenario 4: Storage System session credentials are invalid. Storage System session credentials provided are invalid.

•Scenario 5: Storage System credentials are already specified. User has already logged in with specified Storage System.

•Scenario 6: Cannot start RMH session. A Hyper-V is required to fetch VMs.

•Scenario 2: Unable to fetch Hyper-V.

Failure occurred to start session. Reason displayed.

Logout-Rmh

The optional logout-RmhCmdlet logs off the user from the application.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Logout-Rmh -RmhServerName <RmhServerName> [-Remove]

Table 45 Logout-Rmhparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-Remove	Optional	If specified, RMH user along with
		Hyper-V host/cluster and Storage
		System credentials will be removed from
		RMH credentials repository.

Logout-Rmh 73