HP Application Software Suite for Microsoft Hyper-V manual Show-Connection, Unmount-vCopy

Show-Connection

Show-Connectionshows connection information for current login RMH user name, all RMH Hyper-V hosts/clusters, and all Hyper-V Storage Systems associated with the RMH user. The actively selected Hyper-V will also be shown.

Preconditions

User must first login using Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Show-Connection -RmhServerName <RmhServerName> [-HypervName] [-ShowMissingStorageSystems] [-Verbose]

Table 54 Show-Connectionparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address
-HypervName	Optional	If specified, the resulting connections
		shown will be for this Hyper-V.
		Synonyms for Hyper-V are supported.
		The localhost is not supported.
-ShowMissingStorageSystems	Optional	If specified, Storage Systems used by
		Hyper-V(s), but missing credentials, are
		shown.
-Verbose	Optional	Display progress messages.

Success Paths

•Scenario 1: Connection information shown.

RMH Session and all Hyper-V/ Storage System connection information currently established are shown.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

Unmount-vCopy

Unmount-vCopyunmounts currently mounted Virtual Copy volume(s) for the specified Virtual Copy and Virtual Machine name. The Hyper-V host used in Login-Rmhis used by the mount command.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Unmount-vCopy -RmhServerName <RmhServerName> [-HypervName] -VcNameUuid <VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-Select] [-HypervHostName] [-HypervUsername] [-HypervPassword] [-Verbose]

84 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands