HP StoreServ Application Suite for Microsoft Hyper-V Media manual Mount-vCopyparameters

Success Paths

•Scenario 1: Logout is successful. Logout is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Session is unavailable.

Session specified is unavailable for logout. This means the session is previously closed by logout or timeout from RMH Server.

Mount-vCopy

Mount-vCopyexports and mounts specified Virtual Copy virtual volumes to a Hyper-V host for manual restoration of virtual hard disks. This command can be repeated with unique mount point prefixes if necessary.

Mount point is not required. Volume Guid will only access virtual volume(s) if mount point prefixes are not specified.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Mount-vCopy -RmhServerName <RmhServerName> -HypervName <HypervName> -VcNameUuid <VcNameUuid> -VmNameUuid <VmNameUuid> [-Timestamp] [-MountPointPrefix] [-Select] [-HypervHostName] [-HypervUsername] [-HypervPassword] [-Verbose]

Table 46 Mount-vCopyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VcNameUuid	Required	Select VC by name/uuid.
-VmNameUuid	Required	Select name/uuid to filter VC selection
		by Virtual Machine.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-MountPointPrefix	Optional	Mount point prefix where RMH will
		create a mount point for each Virtual
		Volume mounted using an appended
		mount point name in the format
		RMHv.wwn.partition.timestamp

74 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands