HP Application Software Suite for Microsoft Hyper-V manual Remove-StoreServparameters

Success Paths

•Scenario 1: RMH Policy is removed. Specified RMH Policy is successfully removed.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: VM name/uuid is not specified.

VM name or uuid must be specified to fetch RMH Policy.

•Scenario 3: VM name/uuid specified is invalid.

VM name or uuid must be valid to fetch RMH Policy.

•Scenario 4: RMH Policy does not exist.

RMH Policy is not previously set for specified VM.

Remove-StoreServ

Remove-StoreServremoves HP 3PAR StoreServ credentials associated with a RMH user.

Preconditions

•The user must first login with Login-Rmh.

•HP 3PAR StoreServ credentials must already exist for specified Microsoft Hyper-V.

Syntax

Any optional parameters require square brackets [ ] around them.

Remove-StoreServ -RmhServerName <RmhServerName> -HypervName <HypervName> -StoreServName <StoreServName> [-Verbose]

Table 49 Remove-StoreServparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	This is FQDN or IP address. Synonyms
		for Hyper-V are supported. Thelocalhost
		is not supported.
-StoreServName	Required	Synonyms for HP 3PAR StoreServ are
		supported.
-Verbose	Optional	Displays progress messages.

78 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands