HP StoreServ Application Suite for Microsoft Hyper-V Media manual Get-EncryptedLoginPassword

Result with Description

•List of node names.

List of Hyper-V node names for cluster. Empty list if Hyper-V specified is not a cluster.

Success Paths

•Scenario 1: Hyper-V cluster node names are fetched. At least one Hyper-V cluster node name is returned.

•Scenario 2: Hyper-V specified is not a cluster. Successful without Hyper-V cluster node names returned.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Unable to fetch Hyper-V.

A Hyper-V is required to fetch cluster node names.

Get-EncryptedLoginPassword

Get-EncryptedLoginPasswordretrieves a login password that may be use scripting.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Get-EncryptedLoginCredentials -RmhServerName <RmhServerName> [-Verbose]

Table 40 Get-EncryptedLoginPassword parameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-Verbose	Optional	Displays progress messages.

Success Paths

•Scenario 1: Get is successful. Get is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Failure to encrypt login password. RMH Server cannot encrypt login password.

68 HP 3PAR Recovery Manager for Microsoft Hyper-V Powershell Commands