HP StoreServ Application Suite for Microsoft Hyper-V Media manual Remove-RmhPolicy

Success Paths

•Scenario 1: Remove is successful. Remove is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Session command received on RMH Server is validated to originate from the same IP address that initiated the session. If IP does not match, the command fails.

•Scenario 2: Session is not available.

Session specified is not available for logout. This means the session has been previously closed by logout or timeout from RMH Server.

•Scenario 3: Not previously added. Hyper-V is not previously added.

Remove-RmhPolicy

Remove-RmhPolicyremoves RMH policy of a Virtual Machine.

Preconditions

The user must first login with Login-Rmh.

Syntax

Any optional parameters require square brackets [ ] around them.

Remove-RmhPolicy -RmhServerName <RmhServerName> [-HypervName] -VmNameUuid <VmNameUuid> [-Verbose]

Table 48 Remove-RmhPolicyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Optional	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. The localhost is not
		supported.
-VmNameUuid	Required	Select name/uuid to filter Virtual Copy
		selection by Virtual Machine.
-Verbose	Optional	Displays progress messages.

Remove-RmhPolicy 77