HP Application Software Suite for Microsoft Hyper-V Update-StoreServ, Update-HyperVparameters

Table 56 Update-HyperVparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address
-HypervName	Required	Microsoft Hyper-V host or cluster name.
		This is FQDN or IP address. Synonyms
		are supported. The localhost is not
		supported.
-HypervUsername	Required	Microsoft Hyper-V user name. If cluster,
		ensure all controller nodes in the cluster
		have the same username. Note: if not
		provided, a dialog box will pop up
		asking for credentials.
-HypervPassword	Required	Microsoft Hyper-V password.
		NOTE: If not provided, a dialog box
		will pop up asking for credentials.
-Verbose	Optional	Display progress messages.

Success Paths

•Scenario 1: Update Hyper-V is successful Add Microsoft Hyper-V is successful.

Failure Paths

•Scenario 1: Session owner is invalid.

Every session command received on RMH Server is validated to originate from the same IP address initiating the session. If IP does not match, the command fails.

•Scenario 2: Microsoft Hyper-V session credentials are invalid. Microsoft Hyper-V session credentials provided are invalid.

•Scenario 3: Microsoft Hyper-V credentials are already specified. User has already logged in with specified Microsoft Hyper-V.

Update-StoreServ

Update-StoreServupdates HP 3PAR StoreServ credentials already present in RMH database for user.

Preconditions

•User must first login using Login-Rmh.

•Specified Microsoft Hyper-V credentials must already exist.

Post Conditions

HP 3PAR StoreServ credentials for this user are updated and persisted in database.

Syntax

Any optional parameters require square brackets [ ] around them.

Update-StoreServ -RmhServerName <RmhServerName> -HypervName <HypervName> -StoreServName <StoreServName> -StoreServUsername <StoreServUsername> -StoreServPassword <StoreServPassword> [-Verbose]

Update-StoreServ 87