HP Application Software Suite for Microsoft Hyper-V manual Add-StoreServparameters

•Scenario 3: Login failure on Hyper-V host.

RMH Server cannot authenticate with specified Hyper-V host.

•Scenario 4: Storage System session credentials are invalid. Storage System session credentials provided are invalid.

•Scenario 5: Storage System credentials is already specified. User is already logged in with specified Storage System.

•Scenario 6: Cannot start RMH session.

Failure occurred to start session. Reason displayed.

Add-StoreServ

Add-StoreServis used for each HP 3PAR StoreServ credentials.

•HP 3PAR StoreServ credentials are associated to a specific Microsoft Hyper-V

•This command is only required to initially set up credentials. The command is persisted by RMH Server until the user removes it.

•The user can Add/Remove/Update HP 3PAR StoreServ credentials at any time during the session

Preconditions

•The user must first login with Login-Rmh.

•HP 3PAR StoreServ name must not already exist for specified Microsoft Hyper-V

Syntax

Any optional parameters require square brackets [ ] around them.

Add-StoreServ -RmhServerName <RmhServerName> -HypervName <HypervName> -StoreServName <StoreServName> -StoreServUsername <StoreServUsername> -StoreServPassword <StoreServPassword> [-Verbose]

Table 36 Add-StoreServparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Required	This is FQDN or IP address. Synonyms
		are supported. The localhost is not
		supported.
-StoreServName	Required	This is FQDN or IP address, etc.
		Synonyms for HP 3PAR StoreServ are
		supported.
-StoreServUsername	Required	Note, if not provided, a dialog box will
		pop up asking for credentials.
-StoreServPassword	Required	Note, if not provided, a dialog box will
		pop up asking for credentials.
-Verbose	Optional	Displays progress messages

Add-StoreServ 63