HP StoreServ Application Suite for Microsoft Hyper-V E-Media manual

Table 55 Unmount-vCopyparameters

Parameter	Optional/Required	Description
-RmhServerName	Required	Host name of the RMH Server. This is
		FQDN or IP address.
-HypervName	Optional	Optionally select Hyper-V host/cluster
		to use. If not specified, Hyper-V
		host/cluster must be selected using
		Select-Hyperv. This is FQDN or IP
		address. Synonyms for Hyper-V are
		supported. the localhost is not
		supported.
-VcNameUuid	Required	Select VC by name/uuid.
-VmNameUuid	Required	Select name/uuid to filter VC selection
		by Virtual Machine.
-Timestamp	Optional	Specify timestamp of VC to locate in
		the format mmddyyhhmmss.
-Select	Optional	Specifies the virtual hard disk name,
		virtual volume name, or virtual volume
		WWN in a comma-separated list. For
		virtual hard disk name, this is the full
		filename with path, or just a partial
		name. Wildcards are not allowed. By
		default, RMH will unmount all Virtual
		Copy volumes in a VCS.
-HypervHostName	Optional	Hyper-V host name. Use this option to
		specify host node in cluster. You may
		also use this option in a non-cluster
		environment. If not specified,
		HypervHostName is used from
		Login-Rmh.
-HypervUsername	Optional	Hyper-V user name. If not specified,
		HypervUsername is used from
		Login-Rmh.
-HypervPassword	Optional	Hyper-V user name. If not specified,
		HypervUsername is used from
		Login-Rmh.
-Verbose	Optional	Displays progress messages.

Unmount-vCopy 85