Chapter 2
•To prevent skewing, always load stacks of documents of the same dimensions. However, if you must load stacks of mixed document sizes, center all documents in the stack by width before inserting them in the document feeder.
•Clean the scanning rollers if the rollers are visibly dirty or after scanning a document that has pencil writing on it.
Load documents
1.Pull up the document feeder extension. and adjust the output tray to the size and leading edge orientation (
or 
) of the document. Ensure that the output tray does not extend beyond the surface on which the scanner sits.
2.Adjust the paper guides to the width of the documents, based upon the orientation your are loading the document (
or 
). To adjust the paper guides outward, pull
8 Use the scanner