6
7
6Grasp the fuser handles and pull to remove the fuser from the printer.
WARNING!
The parts on the internal surface of the fuser are very hot. To avoid burning yourself, do not touch those parts.
7Using both hands, slowly and steadily remove any paper from inside the printer. Then, carefully reinsert the fuser and secure the locks.
8Reconnect the power cable and turn on the printer.
9Open the top cover, close it again, and then press 
(GO) if the Go light is flashing. If the Attention light is still blinking, then there is another jam. See “To clear jams from inside the printer” on page 67 and “To clear jams from input areas” on page 68.
70 Problem solving and maintenance | EN |