22 Buffer Overflow error
The Ready light and Go light are on. Press 
(GO) to try to print a portion of the job.
Chosen Personality Not Available error
The Ready light and Go light are blinking. The current job was canceled because the printer language (personality) is not supported.
Press 
(GO) to clear the message.
If you printed the job using one of the PCL drivers, try printing using the PS driver, or vice versa.
Turn off the printer and remove or replace the language font DIMM. Caution: You must turn off the printer before inserting or removing DIMMs.
Contact HP Customer Care. See “HP Customer Care” on page 3, or see the flyer that came in the printer box for contact information.
Data Received error
The Go light is on. |
| |
The printer received data and is waiting for a form feed. Press | (GO) to print the last page. The | |
printer receiving another job can also cause the page to print. |
| |
General Continuable error
The Attention light, Ready light, and Go light are blinking.
Press 
(GO) to try to continue printing.
If the error persists, contact HP Customer Care. See “HP Customer Care” on page 3, or see the flyer that came in the printer box for contact information.
68.x Permanent Storage error
The Attention light is blinking. The nonvolatile memory (NVRAM) is temporarily full.
Press 
(GO) to clear the message. Check the printer settings to ensure they are correct. If the problem persists, contact HP Customer Care. See “HP Customer Care” on page 3, or see the flyer that came in the printer box for contact information.
78 Problem solving and maintenance | EN |