Control panel messages (continued)
Control panel message
64 PRINTER ERROR
For help press
alternates with
To continue turn off then on
68.X PERMANENT STORAGE FULL
alternates with
To continue press
68.X PERMANENT STORAGE WRITE FAIL
alternates with
To continue press
68.X STORAGE ERROR SETTINGS CHANGED
alternates with
To continue press
79.XXXX
PRINTER ERROR
alternates with
To continue turn off then on
8X.YYYY
EIO ERROR
Access Denied
MENUS LOCKED
Description
Scan buffer error.
A
X Description
1 for removable disk (flash or hard)
0 for onboard NVRAM
A
X Description
0 for onboard NVRAM
1 for removable disk (flash or hard)
One or more printer settings saved in the
Press to clear the message. Printing can continue, but there could be unexpected behavior.
A critical hardware error has occurred.
The EIO accessory card in slot X has encountered a critical error.
An attempt has been made to modify a menu item while the control panel security mechanism is enabled by the printer administrator. The message will disappear shortly, and the printer will return to Ready or BUSY state.
Recommended action
1.Turn the printer off and then back on.
2.If the message persists, contact HP Support.
1.Press to continue.
2.For 68.0 errors, turn the printer off and then back on.
3.If a 68.0 error persists, contact HP Support.
4.For 68.1 errors, use the HP Web Jetadmin software to delete files from the disk drive.
5.For 68.1 errors that persist, contact HP Support.
1.Press to continue.
2.If the problem persists, contact HP Support.
1.Press to continue.
2.Turn the printer off and then back on.
3.If the message persists, contact HP Support.
1.Turn the printer off and then back on.
2.If the problem persists, contact HP Support.
For the HP Color LaserJet 3700 series printer only.
1.Turn the printer off and then back on.
2.If the problem persists, contact HP Support.
Contact the printer administrator to change settings.
140 Chapter 8 Problemsolving | ENWW |