Control panel messages (continued)
Control panel message
LOAD TRAY X <TYPE> <SIZE>
alternates with
To use another tray press
Description
Tray X is either empty or configured for a type and size other than what is specified in the job.
Recommended action
Press for help.
or
Press to print from another tray. See Configuring trays for more information.
Loading program X
alternates with
DO NOT POWER OFF
Programs and fonts can be stored on the | For the HP Color LaserJet 3700 series | |
printer file system and are loaded into | printer only. | |
RAM when the printer is turned on. The | No action necessary. | |
number X specifies a sequence number | ||
| ||
indicating the current program being |
| |
loaded. |
|
MANUALLY FEED <TYPE> <SIZE>
alternates with
For help press
MANUALLY FEED <TYPE> <SIZE>
alternates with
To use another tray press .
MANUALLY FEED OUTPUT STACK
alternates with
Then press to print second sides
Moving solenoid
alternates with
To exit press
STOP key
Moving solenoid and motor
alternates with
To exit press
STOP key
Tray 1 is empty and no other tray is available.
There is no paper in the tray and a print job sent requires a specific paper type and size that is not currently available through Tray 1.
The first side of a manual
The printer is executing a Component Test and the component selected is Solenoid.
The printer is executing a Component Test and the components selected are Solenoid and Motor.
Press for help.
or
See Configuring trays for more information.
Press to print from another tray. See Configuring trays for more information.
or
Press for help.
Take the output stack out of the output bin and reinsert it in Tray 1 to print the second side of the
No action necessary.
No action necessary.
144 Chapter 8 Problemsolving | ENWW |